Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
2. Use the remote control within the effective range as the above figure. 3. If the remote control does not work, please check whether the batteries are exhausted or the polarity is wrong. 4. When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on the remote sensor of the TV, the remote operation may be unstable. 7 Installation Connecting antenna Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used. The exact type and position of the antenna will depend upon your particular area. Notes: Turn off the power first, when you connect an outdoor antenna to the antenna input terminal. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal. In thunder and lighting weather, please disconnect the outdoor antenna to avoid thunder/lightning strike. 8 Connecting video and audio equipment Connecting video and audio equipment This TV set provides 2 groups of AV input terminals (including 1 group of S-Video input terminals) for your convenient connection to VCR, DVD or other video equipment to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well. Connecting the rear AV input terminals. Video equipment To audio without S-video R R outputs (1) VIDEO S-VIDEO AUDIO VIDEO AUDIO To audio outputs W R WR To video output WW YY terminal Video equipment with S-video terminal To S-VIDEO output W Y R Yellow (video) white (audio L) red (audio R) Notes: The S-VIDEO input terminal has priority over AV1 VIDEO terminal. If you want to use equipment connect to AV1 VIDEO terminal, please disconnect any plug from S-VIDEO terminal. 9 Connecting the side AV input terminals Connecting the side AV input terminals (2) VIDEO AUDIO W YR Signal VIDEO EQUIPMENT WY R To audio outputsTo video output Connecting the AV output terminals (1) VIDEO S-VIDEO AUDIO VIDEO AUDIO Y Audio Amplifier 10 Operations Operations Menu Introduction ZOOM IMAGE ENHANCE NR CALENDAR GAME SEL ON ON ON ADJ BRIGHTNESS CONTRAST COLOR SHARPNESS TINT SEL 50 50 50 50 50 ADJ COLOR SYS SOUND SYS BACKGROUND SEL AUTO BG ON ADJ Press the MENU button repeatedly to select the screen display as below. In menu operation, press CH+/-to select item, press VOL+/-to adjust selected item. The PICTURE menu The SYSTEM1 menu The SYSTEM2 menu The PRESET menu (TV mode only) PROGRAM TYPE BAND SKIP FINE TUNE MANUAL SEARCH AUTO SEARCH SEL 008 USER2 V-H OFF ADJ The SWAP menu The CLOCK menu (TV mode only) PROGRAM EXCHANGE COPY SEL 007 --:---:- ADJ TIME OFF-TIME ON-TIME CH-TIME PROGRAM MSG-TIME MESSAGE SEL --:---:- --:- --:- -- --:- ADJ 11 Operations Operations Turning On/Turning Off Turning On 1 Press the MAIN POWER SWITCH to turn on the TV set. 2 If no picture appears, then the TV set is in STANDBY mode. Press , CH+/-or 0-9 buttons (one digit only) on the remote control, then the TV set is turned on. When the remote control is not at your hand, you can also press the CH+/-buttons on the TV set to turn on the TV. Note: If there is no input signal to the TV when the TV is on, blue background will appear on the screen (when the BACKGROUND is set to ON). After 10 minutes if there are still no TV signals to the TV, it will access standby mode automatically. Turning Off 1 Press the MAIN POWER SWITCH on the TV set if you want to cut off the power completely. 2 If you want to turn off the TV set temporarily, press the button on the remote control and the TV is in STANDBY mode. Notes: There are three kinds of Auto-Power-off function: 1. When there is no input signal for 10 minutes. 2. Sleep-timer function. 3. Off-timer function. In the AV mode, this Auto-Power-Off function does not work. Last-Mode-Memory: When you turn off the set, the last TV mode, picture/sound setting and preset channels all are memorised, Therefore, next time you turn on the TV, the TV will work in the previous setting mode. If you directly pressed the main power switch on the TV set to turn it off, you can press the main power switch to turn on the TV set. If you press the main power switch to turn off the when in standby mode, you must do as turning on-2 to turn on the TV. 12 Operations Operations Presetting programs Firstly, use the Auto search function to preset all active channels in your area automatically. Then arrange the preset channels with the manual search and program edit functions. Auto Search Press the MENU button to select PRESET menu. Press CH+/-to select AUTO SEARCH. Press VOL+/-and the TV set starts Auto channel preset. All active channels will be preset and stored into the memory automatically. After presetting, the TV will display the first channel. During the process of Auto channel preset, pressing the MENU button will stop the process. Note: Before you start Auto Search, we recommend you to set a proper Sound system and Colour system according to your local area. PROGRAM ...