Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
UHFVHFL VHFH * During presetting, the green block turns into yellow. The moving red block indicates the change of tuning voltage. 3. When presetting is over, the channel position is set to number 1 automatically. 4. Press PSET (PRESET ON/OFF) button to exit preset mode. NOTE: During presetting, auto presetting will be cut off if any one of STAND BY button, PRESET ON/OFF button or AUTO PRESET button is pressed. . MANUAL TUNING 1. Press PSET (PRESET ON/OFF) button to set preset mode. 2. Select a channel position. * If “SKIP” displays on the screen, press "SKIP" button on the front panel to exit "SKIP" mode. SKIP 8 VHFH 8 SKIP llllllllllllll llllllllllllll 3. Press and hold manual tuning button "FT " "FT " till your desired program appears. UHF UHF VHFH VHFH VHFL VHFL CH CH 4. Press PSET (PRESET ON/OFF) button to exit preset mode. The searched program station has been memorised at the present channel position. 5. Repeat 1 ~ 4 steps to search another channel. 5 SKIP BUTTON: . FUNCTION: When CHANNEL SELECTOR button is used to select channels, the channel will be skipped if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the procedure of channel position increasing or decreasing. 0 1 2 58 59 8CHANNEL INCREASE CH CH CH CHANNEL DECREASE (REMOTE) (THE APPLIANCE) 0 1 2 58 59 . OPERATION: 1. Press PSET (PRESET ON/OFF) button to set preset mode. 2. Select a channel by using CHANNEL SELECTOR button. 3. Press "SKIP" button, "SKIP" will be displayed on the screen to indicate that the channel is at "SKIP" mode. SKIP 3 SKIP llllllllllllll 4. Repeat 2 ~ 3 steps to skip another channel. 5. Press PRESET ON/OFF button to exit preset mode. SOUND CONTROL: . VOLUME CONTROL Press the VOL button on the appliance or the Remote Control Unit to increase volume; the red block on the screen moves right. Press the VOL button on the appliance or the Remote Control Unit to decrease volume; the red block on the screen moves left. . MUTE BUTTON (REMOTE CONTROL UNIT) When there is a phone-call or a visitor, it can temporarily shut off the sound without affecting the picture. To resume normal, press the MUTE or VOLUME ( ) button. The previous volume will be displayed for 4 seconds. 6 PICTURE CONTROL (REMOTE CONTROL UNIT) . Press the PICTURE CONTROL button on the Remote Control Unit. The FUNCTION to be adjusted is selected in sequence as shown in the following chart at every press of the button. CONTRAST BRIGHTNESS PICTURE COLOUR . Adjust the button to obtain satisfactory picture. ON SCREEN CAPTION DISPLAY Red Block Moves DISPLAYFUNCTION Press button Press button Contrast CONTRAST Weak Strong Brightness BRIGHTNESS Dark Light Colour COLOUR Pale Deep CALL BUTTON (REMOTE CONTROL UNIT) Press this button, the present channel number will be displayed on the screen. If the electronic clock is in operation, the channel and time will be displayed together at the upper right corner of the screen. Press the button again to cancel. 8 AM 6 : 00 CALL STAND BY BUTTON . Press stand by button( ) on the appliance or the Remote Control Unit, the power indicator is red, the appliance is set to stand by mode. . Press stand by button ( ) again, the appliance is turned on and the indicator is green. 8 SLEEP BUTTON (REMOTE CONTROL UNIT) . Using SLEEP button allows you to have the appliance automatically turned off a predetermined time, and set the appliance to stand by mode. Decrease 10 minutes at every press SLEEP Press again SLEEP 90 (GREEN) SLEEP 0 (RED) SLEEP 10 (GREEN) . After the SLEEP function is set, the remaining time will be automatically displayed for 4 seconds every ten minutes. * If you press STAND BY button while the SLEEP function is operating, the SLEEP function will be cancelled automatically. TIMER OPERATION (REMOTE CONTROL UNIT) Using TIMER button to select one of three timer modes, which are CLOCK mode, ON TIMER mode and OFF TIMER mode respectively. TIMER Press againPress CLOCK AM 12 : 00 1 ON TIME AM 12 : 00 OFF TIME AM 12 : 00 . CLOCK 1. Press the TIMER button until "CLOCK" displays on screen. 2. Press button to set the preset hour. Press button to set the preset minute. 3. After setting the clock, press TIME button to start operating. TIME CLOCK CLOCK AM 12 : 00 AM 12 : 16 8 4. Use CALL button to display the present time on screen. See "CALL" operation * In case of power failure, the clock operation will be cancelled. . ON TIME OPERATION: 1. Set the CLOCK in operation mode. 2. Press the TIMER button until "ON TIME" displays on the screen. 3. Press the button to select the exact hour when you want to turn on the appliance. Press the button to select the exact minute when you want to turn on the appliance. 4. Press the CHANNEL SELECTOR to set your desired channel. TIME 1 ON TIME AM 12 : 00 8 ON TIME PM 7 : 00 5. Press TIME button, the CLOCK indicator is green instead of red ON TIME function starts operating. Then press STAND BY button to set stand by mode. 6. The appliance will be turned on automatically when the clock re...