Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Attention! Priere de lire attentivement la presente notice avant l'installation et la mise en service. Attentie! Lees deze instructies voor de installatie en ingebruikname aandachtig door. D NL F GB GB GB Contents 1 Specifications 2 Regulations for the Prevention of Accidents 2.1 Welding Output 3 Operation 4 Installing the Wire Spool 5 Welding Stainless Steel and Aluminium 6 Practical Hints for MIG Welding 7 Maintenance 8 Trouble Shooting 9 Spare Parts List and Accessoires User Responsibility This machine will perform in conformity with the description contained in the instructions provided. This machine must be checked periodically. Defective equipment (including service leads) should not be used. Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should such repair or replacement become neccessary, it is recommended that such repairs are carried out by qualified persons approved by the equipment manufacturer or its representative. The user of this machine shall have the sole responsibility for any malfunction which results from improver use or unauthorized modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than qualifieded persons approved by the equipment manufacturer or its representatives. Read and understand this manual before commissioning your machine! We reserve the right to change specifications. Product Liability/Warranty These welding machines shall only be used as specified. Any other use requires the written consent of Metabo GmbH, Business Unit Elektra Beckum, P.O.Box 1352, D-49703 Meppen, Germany. This product carries 2 years (5 years on main transformer and choke) manufacturer warranty under the prevailing legal provisions, which may vary from country to country. Retain proof of purchase! You are only entitled to claim warranty against proof of purchase. Please see back cover for manufacturer representative's address nearest you. The warranty period begins with the date of the original purchase by the end user. Proof of purchase should be retained and must be presented in the event of a warranty claim. This warranty excludes and does not cover defects, malfunction and failure caused by natural wear, overload, unreasonable use or failure to provide reasonable and necessary maintenance. In case of a defect notify your dealer or Elektra Beckum distributor, who will decide how to handle your claim. Warranty claims can only be taken care of by your Elektra Beckum dealer or authorized service centre. 1 Specifications MIG/MAG MIG/MAG 170/30 TL 170/30 TL Combi Welding range 25 - 160 A 25 - 160 A Open-circuit voltage 15.3 - 22 V 15.3 - 22 V No-load voltage 19 - 37 V 19 - 38 V Input capacity 4.0 kVA 3.6/4.0 kVA Mains 50/60 Hz AC 1 ~ 230 V 1 ~ 230/2 ~ 400 V Frequency 50-60 Hz 50-60 Hz Welding steps 6 6 Wire diameter 0.6 - 0.8 mm 0.6 - 0.8 mm Weldable material 0.5 - 5 mm 0.5 - 5 mm Duty cycle (25°c/ 40°C ) 160 A 30%/20% 160 A 30%/20% 100% (25°c/ 40°C ) 90 A/60A 90 A/60A Mains fuse T 16 A T 16 A Cooling F F Protection class IP 21 IP 21 Isulation class F F Welding gun assembly SB 14/2 SB 14/2 Dimensions l x w x h 840x410x580 840x410x580 Weight 61 kg 62 kg MIG/MAG MIG/MAG MIG/MAG 180/35 ET 200/35 ET 230/40 ET Combi Welding range 25 - 180 A 25 - 200 A 25 - 230 A Open-circuit voltage 15.3 - 23 V 15.3 - 24 V 15.3 - 25,5 V No-load voltage 17.5 - 33 V 21 - 34 V 19 - 34 V Input capacity 3.6/4.6 kVA 6 kVA 6.5 kVA Mains 50/60 Hz AC 1 ~ 230 V/2 ~ 400 V 3 ~ 400 V 3 ~ 400 V Frequency 50-60 Hz 50-60 Hz 50-60 Hz Welding steps 6 6 6 Wire diameter 0.6 - 0.8 mm 1,0 mm 0.6 - 1.0 mm Weldable material 0.5 - 6 mm 0.5 - 7 mm 0.6 - 9 mm Duty cycle (25°c/ 40°C ) 180 A 35%/25% 200 A 35%725% 230 A 40%/30% 100% (25°c/ 40°C ) 100 A/70A 110 A/75A 140 A/100A Mains fuse T 16 A T 16 A T 16 A Cooling F F F Protection class IP 21 IP 21 IP 21 Isulation class F F F Welding gun assembly SB 15/2 SB 15/2 SB 25/2 Dimensions l x w x h 840x410x580 840x410x580 840x410x580 Weight 68 kg 75 kg 81HAM kg StandardScope of delivery: Welding machine with MIG/MAG torch c/w contact tip and gas shroud, pressure regulator for shielding gas, earth clamp, wire brush and nozzle anti-clogging spray. delivery: Regulations for the Prevention of Accidents Know the applicable regulations for electric arc welding and strictly adhere to. Safety Instructions . Protection against electrical accidents -Welding cables are to be firmly connected to ensure proper conducting capacity -Mains cord and welding cables are to be protected against damages. -Replace damaged mains cords with genuine Elektra Beckum parts only. -Place welding gun onto insulating backing during short work break. -For longer breaks switch off machine. -When welding, wear dry and insulating gloves and shoes. -For maintenance and repair work disconnect from power mains. . Protection against UV rays, burns and fumes -Wear protective clothing to prevent burns (sleeved gloves, welding apron etc.) -Alwa...