Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
Do notexpose the generator to moisture, rain or snow. Do not let the generator get wet, and do not operate it with wet hands. Thank you for purchasing a Honda generator/welder. We want to help you get the best results from your new generator/welder and to operate it safely. This manual contains the information on how to do that; please read it carefully. This owner’s manual describes the operation and maintenance of the EWI 71 Honda generator/welder. All information in this publication is based on the latest product information available at the time of printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation. No part of this publication may be reproduced without written permission. This manual should be considered a permanent part of the generator/welder and should remain with it if it is resold. Safety Messages Your safety and the safety of others is very important. We have provided important safety messages in this manual and on the generator/welder. Please read these messages carefully. A safety message alerts you to potential hazards that could hurt you or others. Each safety message is preceded by a safety alert symbol Band one of three words: DANGER, WARNING, or CAUTION. These mean m. D ’ You WILL be KILLED or SERIOUSLY HURT if you don’t follow instructions. m! A - You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions. m * . L 0 You CAN be HURT if you don’t follow instructions. Each message tells you what the hazard is, what can happen, and what you can do to avoid or reduce injury. Damage Prevention Messages You will also see other important messages that are preceded by the word NOTICE. This word means: (1 Your generator/welders or other property could be damaged if you don’t follow instructions. The purpose of these messages is to help prevent damage to your generator/ welder, other property, or the environment. CONTENTS SAFETY ...................................................................................................... 4 Safety Label Locations .......................................................................... 4 Safety Information .................................................................................. 6 COMPONENT IDENTIFICATION .............................................................. 8 CONTROLS .............................................................................................. 10 Engine Switch ...................................................................................... 10 Recoil Starter ...................................................................................... 10 Fuel Valve ............................................................................................ 11 Choke Rod .......................................................................................... 11 Circuit Breaker .................................................................................... 12 Oil Alert System .................................................................................. 12 Auto-throttle system ............................................................................ 13 AC/DC (Weld) Selector Switch .....i ...................................................... 13 Welding Cable Terminal ...................................................................... 14 Welding Current Adjust System .......................................................... 14 GENERATOR USE .................................................................................. 15 Connections to a Building’s Electrical System .................................... 15 AC Operation ...................................................................................... 16 Welding ................................................................................................ 17 Selecting the Correct Welding Current ................................................ 17 Welding Cable Selection ...................................................................... 18 Welding Duty Cycle.. ............................................................................ 18 Polarity Selection ................................................................................ 19 High Altitude Operation ........................................................................ 19 Auto-throttle System ............................................................................ 20 PREOPERATION CHECK.. ...................................................................... 21 Engine Oil ............................................................................................ 21 Fuel Recommendation ........................................................................ 22 STARTING THE ENGINE/STOPPING THE ENGINE .............................. 24 MAINTENANCE.. ...................................................................................... 25 Maintenance Schedule .........................................