Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
®® InterMetro Industries Corporation Wilkes-Barre, PA 18705 570-825-2741 TABLE OF CONTENTS SECTION PAGE I. Introduction A. Identifying Your Cabinet...............................1 B. Features .......................................................2 II. Operating Instructions A. Reversible Doors .........................................2 B. Slide Rack Assemblies ................................2 C1. HM2000 Holding Module ............................. 3 C2. FL2000 High Humidity Holding .................... 4 III. Food Holding Guidelines A. HM2000/HM15LW Recommended Food Holding Guidelines ...................... 5 & 6 IV. Cleaning Instructions A. Specific Cleaning Instructions ..................... 7 B. General Cleaning Instructions ..................... 7 V. Maintenance A. Cabinet Maintenance...................................7 B. Module Maintenance ................................... 7 C. Blower Motor Maintenance ..........................7 VI. Relacement Parts, Procedures and Wiring Diagrams A. Cabinet .................................................. 8 & 9 B. Modules .....................................................10 HM2000 Module Replacement Parts Diagram........11 Wiring Schematic ................................... 12 FL2000 Module Replacement Parts Diagram........13 Wiring Schematic .................................... 14 I. INTRODUCTION A. IDENTIFYING YOUR CABINET Your cabinet assembly has been shipped in two cartons. The first carton contains the cabinet with module. The other carton contains the slide racks. There are several component numbers which you may want to record for future reference: the cabinet model number, the module model number along with the module serial number and the slide rack model number. Refer to the photo at right to locate these numbers. The slide rack model number is located on the label affixed to the ends of the rack carton. It is recommended that all numbers be recorded in an appropriate place, such as at the bottom of this page. AIso, please record the cabinet model number and module serial number on the Warranty Card found at the back of this manual. Be sure to complete the remainder of the Warranty Card and return it to Metro within fifteen (15) days of delivery of the cabinet. Once you have located and recorded these numbers, refer to the sample numbers given on this page to identify the components of your 199 series cabinet. Cabinet Model No. ________________________ Module Model No. _________________________ Module Serial No. _________________________ Slide Rack Model No. ______________________ SAMPLE OF CABINET LABELING C199-HM2000 = Full Height, Holding C199T-HM2000 = 3/4 Height, Holding OR FL199-HM2000 = Full Height, High Humidity Holding FL199H-HM2000 = 1/2 Height, High Humidity Holding SAMPLE OF SLIDE RACK CARTON LABELING C4SC = Full Height C4SC-T = 3/4 Height C4SC-H = 1/2 Height Indicates Slide Spacing C4SC/-T/-H = Wire 3" Spacing C8SN/-T/-H = Aluminum Fixed on 11/2" Spacing CVSN/-T/-H = Aluminum Adjustable LOCATION OF CABINET MODEL NUMBER LOCATION OF MODULE MODEL NUMBER AND SERIAL NUMBER FL199-HM2000 Full Height Unit Shown NOTE: Please read this manual thoroughly before using your cabinet. If you should have questions, please contact Metro customer service department. 1 B. FEATURES — ALL MODELS In order to utilize your new cabinet to its full potential, take a minute to identify the following features which have been provided for your convenience. • The module has been placed at the base of the cabinet for easy accessibility and efficient operation. • Clearly-marked control panel for easy viewing and allowing climate adjustments without opening the door(s). • Removable water pan (C199) or water bottle (FL199). • Rear pan stop. • Field reversible insulated and gasketed door(s). • Easy pull adjustable magnetic door latch. • Cord keeper at rear of cabinet which folds flat to prevent damage to surrounding walls. • All components — door(s), module, chimney, slide racks — removable to permit thorough, obstruction-free cleaning. II. OPERATING INSTRUCTIONS A. REVERSIBLE DOOR(S) The door(s) on your cabinet can be reversed to accommodate a right- or left-hand opening. The cabinet has been shipped with the hinges mounted on the right-hand side. To reverse, follow the instructions listed below (read completely before starting procedure): 1. With the doors in the closed position remove the hinge pin by driving it out using a hammer and a drive pin or small diameter screwdriver. 2. Once the pins are removed grasp the door firmly and pull the latch lever, this will release the door. Repeat the process for double door units. Set the door(s) aside being careful not to damage the gaskets. 3. Remove the screws from the left side of the cabinet and set aside. Then remove the cabinet mounted part of the hinge and remount to the left side of the cabinet. Put the screws removed from the left side of the cabinet, into the remaining holes on the right side of the cabinet. Ti...
Эта инструкция также подходит к моделям:Сушильные машины - FL199 (473.08 kb)