Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The indicator for that cycle will be illuminated. Follow the fabric care label instructions on items to be dried. For best results To change the cycle once it has begun, press the cancel button before selecting a new cycle. Just turning the cycle selector knob to another selection will not change the cycle. If the selection is changed after the cycle starts, the indicator lights will blink, the signal will beep and “Err” will be displayed. The signal will beep and the status lights will flash, but the original cycle will continue. Auto Dry Cycles Auto Dry cycles take the guesswork out of selecting the correct drying time for each load. Moisture sensing bars at the back of the dryer drum sense the moisture level of the load as it tumbles through the heated air. With Auto Dry cycles, the load will automatically be dried at the selected temperature to the desired dryness level. Auto Dry cycles save time and energy and protect fabrics. The estimated drying time will be displayed for about 5 minutes. Then the outside of the display will light up in a circular track to indicate the drying time is automatically being determined by the sensors. When the load has reached the selected dryness level, it will continue to tumble during a cool down period. This helps reduce wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load and fabric type. If the load is too small or almost dry, the moisture sensing bars may not detect enough moisture to continue the cycle and the cycle may end after a few minutes. If this occurs, select a Timed Dry cycle. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time. Towels/Bedding Select this Auto Dry cycle for towel loads. Heavy Select this Auto Dry cycle for sturdy work clothes. Normal Select this Auto Dry cycle for cotton items. Casual Select this Auto Dry cycle for cottons and blends with a no-iron finish. Delicates Select this Auto Dry cycle for knits and delicate items. Timed Dry Cycles WARNING FIRE HAZARD To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics similarly textured, rubber-like materials. Use the Timed Dry cycle and the Air Fluff/No Heat setting. Quick Select this timed cycle to quickly dry small loads in 25 minutes. Timed Dry To manually select the drying time for any load, turn the knob to Timed Dry. Drying times from 15 to 90 minutes can be selected by continuing to turn the knob. Drying time will be displayed. You will not be able to select a Dryness level. OPERATING INSTRUCTIONS This manual covers many models and not all cycles, options, or features listed are available on every model. Console shown above for reference only. Your model may differ. Cycle Selection, continued Sanitize Your Laundry with Timed Dry Select 90 minute Timed Dry with Sanitize heat to remove harmful bacteria from your laundry. Use this cycle for clothing or other items where sanitization is desired. NSF Protolcol P154 Sanitization Performance of Residential Clothes Dryers ..NOTE The Sanitize option has been certified by NSF International®, an independent third-party testing and certification organization dedicated to public health, safety and environmental protection. This Timed Dry cycle will kill 99.9% of bacteria with no carryover of bacteria between loads. A higher temperatures is required. Please check fabric care labels to prevent damage. Cycle Settings Follow the fabric care label instructions on items to be dried. For best results Appropriate drying Temperature, Dryness Level and Options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. If changes are attempted after the cycle starts, the lights will blink, the signal will beep and “Err” will be displayed. Drying Temperature To change the preset temperature, press the Temperature button to scroll to the desired setting. To protect your fabrics, not all temperatures are available with every cycle. The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future. To return to factory settings, press the Start/Pause and Select buttons at the same time and hold until the signal sounds. ..NOTE To change the Temperature after the cycle starts, press Start/Pause, adjust the setting and press Start/Pause to resume the cycle. Sanitize Recommended for durable fabrics and towels. NSF Protolcol P154 Sanitization Performance of Residential Clothes Dryers ..NOTE The Sanitize option has been certified by NSF International®, an independent third-party testing and certification organization dedicated to public health, safety and environmental protection. This option will kill 99.9% of bacteria with no carryover of bacteria between loads. A higher temperatures is required. Please check fabric care labels to prevent damage. High Recommended for most cotton fabrics. Medium ...