Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
3. Select a drying option (if needed) ^A drying option can be selected or deselected with each press of the button. Quick Guide 4. Select the dryness level ^ Press the selection button until the desired indicator illuminates. 5. Select the buzzer (if desired) 6. Start the program ^ Press the "Start/Stop" button. 7. At the end of a program The "Anti-crease / End" indicator will light. ^ Press "Door" and remove the laundry. ^ Clean the lint filter. ^ Press the "On/Off" button to turn off the dryer. Quick Guide Program When to use Note Normal Available drying options Turbo, Gentle, Anti-crease Extra Dry For laundry to be folded and shelved immediately, e.g. jeans, towels. The "Extra Dry" program should not be selected for jersey materials. Items may shrink. More Dry For uniform loads, e.g. sheets, underwear, socks. - Normal For knitted items that may shrink, e.g. jersey material or lightweight cottons. If items are still damp, dry again using "More Dry". Less Dry For items to be left damp for ironing. - Hand Iron If fabrics are too damp, dry again using "Less Dry". Rotary Iron For items to be ironed with a rotary iron. To prevent moisture loss, roll up the laundry until ready to iron. Wrinkle-free Available drying options Turbo, Gentle, Anti-crease More Dry For items that do not require ironing, e.g. pants and shirts. - Normal For items to be hung after drying. Less Dry For items which require ironing. Reduce load size for fabrics that wrinkle easily. Special Programs Available drying options: Anti-crease only available in Fluff, Sturdy Woolens Delicate items which allow machine drying. Take items out immediately after the end of the program while still slightly damp. Allow items to air dry. Smooth Program for reducing creasing in delicate items. - Sturdy For mixed loads of durable items. - Fluff Individual items to be freshened and fluffed with cool air. Reduce load size. TIMED CYCLES Available drying options Gentle, Anti-crease 20 min Individual items or very small loads, e.g. beach towels, swimsuits. - 30 min Frequently asked questions What if the dryer will not run? Possible fault Fix The "Start/Stop" button was not pressed. Make sure the dryer is on. Press the "Start/ Stop" button to begin the drying program. The circuit breaker tripped or the dryer is unplugged. Make sure the dryer is plugged in or reset the circuit breaker. The door is not closed. Close the door properly. How do I prevent static cling? Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer. Do not use fabric softener sheets in this dryer. What if the drum light does not come on? Possible fault Fix The bulb may be bad or burned out. See "Changing the light bulb." What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started? Possible fault Fix The child lock is activated. Deactivate the child lock. See "Child Lock." What if the program stops, the "Anti-crease/End" indicator lights and the buzzer sounds? Possible fault Fix The drum is empty. Load laundry into the dryer. The dryer will not operate when the drum is empty. Single items should be dried with "Sturdy" or a timed program and dry items in the "Fluff" program. Frequently asked questions What if the "Filter/Vent" fault indicator is lit? Possible fault Fix The lint filter is clogged. Clean the lint filters. See "Dryer care". The air supply in the room is insufficient. Open a window or door to increase airflow. What if the program runs too long or stops? Possible fault Fix The airflow is insufficient in the area of the dryer. Open a window or door to increase airflow. The lint filters are clogged. Clean the lint filters (see "Dryer care"). The laundry was not spun sufficiently in the washer. Select a higher spin speed in the wash program. The dryer is overloaded. Reduce the load size. Metal zippers interfere with the dryer’s moisture sensors. Select a timed program to avoid overdrying. The condenser is clogged with lint or detergent residue. Clean the condenser periodically (see "Dryer care"). The air vent below the door is blocked. Remove any blockages. What if the laundry is not dry enough? Possible fault The load contained too many dissimilar items (size and fabric.) What if water has collected around the drum opening? Possible fault This is condensed moisture from the laundry. Technical Service In the event of a fault you cannot fix yourself, please contact the Miele Technical Service Department U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca When contacting Technical Service, please quote the model and serial number of your appliance. They can be found on the data plate located below the drum opening. PC Update The indicator on the control panel marked PC allows a technician to update the dryer to make use of new technology. For example, if new programs or fabrics are developed, a service technician will be able to modify the existing program cycles accordingly. 24 INSTALLATION IN...