Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Speed Queen, модель BG 3119

Производитель: Speed Queen
Размер: 943.43 kb
Название файла: 59703R1.pdf

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


Items labeled “Dry With Low Heat” DELICATE DELICATE The suggested timer settings are approximate. Check garment care labels for proper dryer setting. At first, set indicator toward center of drying zone. You may find you will get better results for your loads by setting the indicator to either side. Turn timer knob to a lower setting (clockwise) for less drying, or to a higher setting (counterclockwise) for more drying. IMPORTANT: The heat on DELICATE is not sufficient to remove wrinkles from permanent press. 11 TIME DRY Cycle This cycle will operate for the number of minutes for which it is set (up to 70). The drying temperature is controlled by the FABRIC SELECTOR switch. Use for any load desired. Use for items you might want to remove while still damp. Turn the timer knob for the number of minutes required for drying. This cycle has a 5 minute cool-down (no heat) period. The dryer will not heat if set for 5 minutes or less. • TIME DRY Suggested Dryer Settings Load Type Minutes (Approximate) FABRIC SELECTOR Cottons Heavyweight/Average load 40-60 NORMAL PERM PRESS Lightweight/Average load 15-30 NORMAL PERM PRESS or DELICATE The times are approximate, requirements will determine Your loads, installation and drying the setting you should use. 12 PERMANENT PRESS Cycle For permanent press, polyester knits and other synthetics that are "no-iron”. This cycle has a 10 minute cool-down (no heat) period. • PERMANENT PRESS Suggested Dryer Settings Load Type Minutes (Approximate) FABRIC SELECTOR Permanent Press Polyester Knits Heavy and Mediumweight Synthetics 20-30 NORMAL PERM PRESS Lightweight, Delicates, Sheers and those labeled ‘‘Dry With Low Heat” 10-20 NORMAL PERM PRESS The suggested timer settings are approximate. Check garment care labels for proper dryer setting. At first, set indicator toward center of drying zone. You may find you will get better results for your loads by setting the indicator to either side. Turn timer knob to a lower setting (clockwise) for less drying, or to a higher setting (counterclockwise) for more drying. IMPORTANT: The heat on DELICATE is not sufficient to remove wrinkles from permanent press. 13...

Эта инструкция также подходит к моделям:
Сушильные машины - BE 3113 (943.43 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории