Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Do not use the dryer if it does not stop tumbling when the door is opened or start tumbling without pressing the GO pad. Remove the dryer from use and call the serviceman. ON/SELECT | REGULAR • • MEMORY RECALL | PERM PRESS GO 1 | DELICATES 1 | KNITS stop | NO HEAT RESET • • 5. Press the GO pad. The dryer will start immediately and stop automatically when the cycle has completed. Dryer will not start until the GO pad is pressed. NOTE: When you have selected an automatic cycle, you will see the letters AU appear in the display area. TO STOP DRYER AT ANY TIME: Open the loading door or press the STOP pad. TO RESTART DRYER: Close the loading door, select a cycle if necessary and press the GO pad. The dryer will not operate if the loading door is open. STATUS Lights The STATUS lights illuminate to show you at a glance, what is happening inside your dryer. Clean Filter Will flash before each cycle to remind you to clean the dryer’s lint filter before each load. A clean lint filter promotes faster drying and energy savings. Drying Remains lit while your clothes are drying. Cool-Down Lights up during the cool-down portion of the cycle. Wrinkle-Free Lights up during the wrinkle-free portion of the cycle when the wrinkle-free option has been selected. The clothes may be removed from the dryer at any time during the wrinkle-free portion. STATUS mm CLEAN RLTER DRYING COOL DOWN WRINKLE - FREE Memory Save (Not on all models) You can create and save your favorite cycles by using the the MEMORY SAVE option. Each programmed cycle — REGULAR, PERM PRESS, DELICATES, KNITS and NO HEAT can have one additional memory cycle for a total of five memories or favorite cycles in addition to the programmed cycles. To save a favorite cycle, first select a program cycle, then make the changes you want for that cycle. When all selections have been made, press the MEMORY pad. Your favorite cycle is now saved. This cycle can be stored until you either change the cycle or until there is a power outage of several seconds or longer. To recall your memory cycle, press a SELECT cycle pad twice. The light on the MEMORY pad will light up when the memory cycle is recalled. 8 To change a memory cycle, press an ON/SELECT cycle pad twice to recall the memory cycle. Change the cycle, then press the MEMORY SAVE pad. The old memory cycle will be deleted and the new cycle memorized in its place. FOR EXAMPLE: Let’s change and save a REGULAR cycle. We will change the cycle by selecting the EXTRA DRY dryness level and add the WRINKLE-FREE option. First, press the REGULAR ON/SELECT pad. Next, press the EXTRA DRY pad, and then press the WRINKLE-FREE pad. When all selections have been made, press the MEMORY SAVE pad. To recall the cycle, press the REGULAR pad twice. Wrinkle-Free (Not on all models) Press the WRINKLE-FREE pad. This will allow an extended cool-down period of up to 99 minutes at the end of the selected cycle. This cycle p...
Эта инструкция также подходит к моделям:Сушильные машины - AE7133 (1.1 mb)
Сушильные машины - AE7233 (1.1 mb)
Сушильные машины - AE9233 (1.1 mb)
Сушильные машины - AE9433 (1.1 mb)