Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
(56Z frame) 6 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt 7 153002 4 5/16" Lock Washer 8 153001 4 5/16" Flat Washer 9* 100075 1 1 HP 220/230/380/460v 3O 50/60 Hz T.E.F.C. Motor with 3/4" Shaft (56Z frame) 10 120200 1 3/8" x 90. Connector 814779 1 3-Phase (3O) Blower (Fan/Impellor) Motor Harness 11 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt 12 153002 4 5/16" Lock Washer 13 153001 4 5/16" Flat Washer 14 154000 8 5/16" Tinnerman Nut 15 152004 7 5/16" Hex Nut 16 153002 4 5/16" Lock Washer 17 153001 4 5/16" Flat Washer 18 803566 1 Reversing Motor Mount ONLY (56Z frame) 804029* 1 Reversing T.E.F.C. Motor Mount Assembly Complete (for 60 Hz Models ONLY) (includes illus. nos. 2 through 14 and 18 through 24) 804030 1 (for 50 Hz Models ONLY) (includes illus. nos. 2 through 14 and 18 through 24) 19 117600 4 Noise Suppressor Tape (sold in feet) 20 153050 1 1/2" S.A.E. Flat Washer 21 100702 1 1/8" x 1/8" x 1-1/2" Key 22 100603 1 16" Impellor with 3/4" Bore 23 153050 ** 1/2" S.A.E. Flat Washer 24 152006 2 1/2-20 Left Hand Jam Nut * Specify voltage when ordering. ** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 32 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Hot Surface Ignition (HSI) Burner Assembly Hot Surface Ignition (HSI) Burner Assembly Illus. No. Part No. Qty. Description 1 882022* 1 Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For models mfd. with Natural Gas ONLY 882023* 1 L.P. (liquid propane) Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For models mfd. with L.P. (liquid propane) Gas ONLY 802237 1 Burner Box ONLY 881655** 1 Burner L.P. Conversion Kit 2 353260 1 Burner Box Front ONLY 3 150413 5 #10-16 x 1/2" Hex Head TEK Crimptite Screw 4 810029 1 Hot Surface Ignition (HSI) Module Mounting Bracket 5 881797 1 HSI (Hot Surface Ignition) Module II 6 141105 3 Large Burner Tube 7 150103 3 #8-32 x 1/2" Phillips Round Head Machine Screw 8 153000 3 #8 Steel Burr 9 151001 3 #8-32 Pal Nut 10** 140853 3 #23 Burner Orifice (natural gas) ONLY 140810 3 #42 Burner Orifice (liquid propane gas) ONLY 11 141232 1 3-Port Manifold 12 318700 2 Pipe Bracket 13 150300 2 #10 x 1/2" Hex Washer TEK Screw 14 128927 1 1/2" 24 VAC Redundant (natural gas) Gas Valve 880960 1 1/2" 24 VAC L.P. (liquid propane) Gas Valve Assembly 140411 1 24 VAC Gas Valve L.P. (liquid propane) Conversion Kit 15 881367 1 1/2" Union Shut Off with Tail Piece 16 142809 1 1/2" x 29-1/8" Nipple 17 323737 1 Pipe Bracket 18 319704 1 Hi-Limit Mounting Bracket 19 151000 2 #6-32 Pal Nut 20 150001 2 #6-32 x 1/2" Phillips Round Head Machine Screw 21 130401 1 330. F Hi-Limit ONLY 22 --------1 Sail Switch (refer to Sail Switch Assembly on page 34) 23 143000 1 3/4" TO 1/2" Reducing Coupling 142936 1 3/4" BSPT x 1/2" Reducing Coupling (CE dryers only) 24 150413 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw 25 150413 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw 26 151001 2 #8-32 Pal Nut 27 150413 3 #10-16 x 1/2" Hex Head TEK Crimptite Screw 28 128921 1 HSI Flame Sensor 29 150301 1 #8-18 x 7/16" Phillips Pan Head TEK Screw 30 881597 1 Hot Surface Ignitor (2-1/2" length) - 24 VAC 31 150413 1 #10-16 x 1/2" Hex Head TEK Crimptite Screw * Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 Sail Switch Assembly Illus. No. Part No. Qty. Description 1 319203 1 Sail Switch Mounting Bracket 2 319202 1 Sail Switch Damper (flat) 3 319201 1 Sail Switch Box Cover 4 319200 1 Sail Switch Box 5 154004 1 Twin Speed Nut 6 154002 1 1/8" Push-on Fastener 7 150300 4 #10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw 8 150303 2 #4 x 3/4" Pan Head "A" Machine Screw 9 122200 1 Sail Switch ONLY 881706 1 Sail Switch Box Assembly Complete (includes illus. nos. 1 through 10) 10 105500 1 Sail Switch Actuator Rod American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Telephone: (508) 678-9000 Fax: (508) 678-9447 Back Guard Assemblies 35 Illus. No. Part No. Qty. Description 1 314501 1 Bottom Back Guard (for models manufactured as of July 13, 1998) 314739 1 Bottom Back Guard (for models manufactured prior to July 13, 1998) 2 150301 12 #8-18 x 7/16" Phillips Pan Head TEK Screw 3 322809 1 Rear Electrical Box Cover 4 150301 4 #8-18 x 7/16" Phillips Pan Head TEK Screw 5 103500 4 Leveling Leg 6 150301 7 #8-18 x 7/16" Phillips Pan Head TEK Screw 7 150301 12 #8-18 x 7/16" Phillips Pan Head TEK Screw 8 314738 1 Top Back Guard 9 314757 1 Outer Top 10 882099 1 8” to 10” increaser (for models manufactured as of July 13, 1998) Additional Parts Available Part No. Description 112039 "Black/White/Green Ground" Label 112040 "Lint Compartment" Label 112041 "CAUTION - Exhausted" Label 112284 "Phase 6 OPL Program Location Summary" Label 114006 "WARNING - Fire Hazards" Label 120100 3/8" Straight (BX) Connector 120300 3/8" x 45. (BX) Connector 120400 3/8" Red J...