Оценок - 4, средний балл: 3 ( )

Производитель: AEG Размер: 1.01 mb Название файла: 204900EN.pdf Язык инструкции:

During this sequence the alternately reversing tumbling action of the drum continuously loosens the laundry so that it remains fluffy and crease-free until taken out. When the anti-crease programme has ended, I automatically switch myself off. You should remove your laundry from my drum by this time to avoid creasing. Programme end Switching off You switch me off by turning my programme selector switch to the the machine 0 position. My drum lighting is then also switched off. My operating indicator goes out. 40 2/ABKN 12/90 GB-EU - 2/PRGEMTB 12/90 GB-EU 2/RFL 12/90 GB-EU - 2/WPA2 09/91 GB-EU Cleaning the fluff filter Abraded fabric - 70% generated during wearing, 20% during washing, and only 10% during drying (source: HEA, Hauptbera-tungsstelle fur Elektrizitatsanwendung e. V. Frankfurt (electricity use advice centre) - arises in the form of fluff and collects in the fluff filter inside the machine door. To ensure trouble-free air circulation, you must clean my fluff filter after every drying sequence. To do this, fold up the filter cover (coarse filter) and remove the fluff from the fine filter. Removal of fluff will be made easier if you moisten your hand or use a damp cloth. After cleaning, fold down the coarse filter and reengage it securely. Cleaning, maintenance, and care To clean the interior of the drum, we recommend you wipe it out regularly with a cloth soaked in vinegar. Never clean my control panel or controls with commercial furniture polishes or harsh cleansers. Should cleaning be necessary, just use a damp cloth. Cleaning the interior of the drum Cleaning the control panel and controls 41 Faults you can rectify yourself Stacking kit Installing undera worktop 42 If you think your tumble dryer is not working properly... ... if the dryer does not work? ■ Have you plugged in the machine? ■ Have you set the drying time? ■ Have you pressed the start button? ■ Have you closed the door properly? ■ Is the fuse in the fuse box in good working order? ... if the machine does not dry satisfactorily? ■ Have you set the right drying time? ■ Have you cleaned the fluff filter? ■ Have you used the recommended wash load? ■ Have you properly spin-dried the laundry before drying? ... if the drum lighting does not work? ■ Have you plugged in the machine? ■ Have you turned the programme selector switch from the 0 position? ■ Does the bulb still work or does it need to be changed? In this case, use only a 10 W bulb which you can order from our customer service department under ET-No. 647078970. Caution: Before replacing it, pull out the plug! Special accessories You can order the following special accessories via your retailer: Your tumble dryer can be stacked together with any LAVAMAT fully automatic washing machine of the current or previous series by means of a space-saving stacking kit. Two different kits are available: 1. Stacking kit with retractable panel (E-No. 607 899978) 2. Stacking kit without retractable panel (E-No. 916018900) You can install me in kitchen furniture runs. After removing my worktop, you must cover the electrical parts with an earthed cover sheet (ET-No. 647405423). 2/WTWA4 09/91 GB-EU - 2/SBHA-2 11/95 GB-EU Rehingeing the door H BA 2/159 If the door as hinged on the right fails to meet local conditions, the door can be rehinged on the left. Pull out the mains plug! Procedure: 1. Unscrew screws “A” inside the door. 2. Remove the door by sliding horizontally. 3. Unscrew screws “A” on hinge lugs “B”. 4. Remove hinge lugs. 5. Press out plastic parts “F” by pressing with a screwdriver and refit on the opposite side. 6. Press out plastic parts “C” by pressing with a screwdriver. 7. Remove plastic parts “C” and refit on the RH side of the dryer. 8. Unscrew door lock “G”. Prise out plastic part “H” using a screwdriver and refit on the opposite side. Remount door lock “G” on the RH side. 9. Fit and screw on hinge lugs “B” on the LH side of the dryer. 10. Remove screw of door lock “D” inside the door and remove door lock. 11. Press out plastic part “E” by pressing with a screwdriver and refit on the opposite side of the door. 12. Fit and screw back on door lock “D” inside the door on the left. 13. Remount door on hinge lugs. Hint on access protection: The appliance is safe to operate again only when all plastic parts are fitted. Customer service If you find no reference to any particular fault in my Operating Instructions, please contact the service centre. When doing so, quote the E-No. and F-No. of your dryer. You will find these numbers on my rating plate. Your indication of these numbers enables the service centre to make precise identification of the required spare part so that your tumble dryer can be repaired at the engineer’s first visit. You will thus save yourself additional costs due to any possible repeated trips by the service engineer. To keep these numbers handy, we recommend you to enter them here: E-No.............

Скачать инструкцию

Чтобы скачать, введите 2 цифры: