Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
1. Position the PROGRAMME knob on 2. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start 3 Cottons Ready to Iron Dries your clothes on High heat setting, ready for ironing. 1. Position the PROGRAMME knob on 3. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start 4 Synthetics Cupboard Dry Dries your clothes on High heat setting, ready for putting away. 1. Position the PROGRAMME knob on 4. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start 5 Synthetics Hanger Dry Dries your clothes on High heat setting, ready for hanging. 1. Position the PROGRAMME knob on 5. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start 6 Synthetics Ready to Iron Dries your clothes on High heat setting, ready for ironing. 1. Position the PROGRAMME knob on 6. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start 7 Special Shoes Dries your shoes on Low heat setting, ready to be worn (see previous page). 1. Position the PROGRAMME knob on 7. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm 8 Special Sports Dries your sports clothes on Low heat setting, ready to be worn (see previous page). 1. Position the PROGRAMME knob on 8. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start eg. Acrylics 9 Delicate Dries your clothes on Low heat setting, ready to be worn. 1. Position the PROGRAMME knob on 9. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm Delayed start 10 Easy Iron Brief programme (approximately 10 minutes) that softens fibres of clothing that is ready for ironing. 1. Position the PROGRAMME knob on 10. 2. Select any Options, if required. 3. Press the START button . ! This is not a drying programme (see previous page). Options available: Alarm Timed Drying (160, 120, 80 or 40 minutes) Dries wet clothing that you wish to dry on low heat or small loads (less than 1kg). Can be used with high heat option if you prefer to use a timed programme. 1. Position the PROGRAMME knob on the desired time: 160, 120, 80 or 40. 2. Select any Options, if required. 3. Press the START button . Options available: Alarm , High Heat , Delayed Start . Consult suggested drying times (see Laundry). The last 10 minutes of these programmes is the Cool Tumble (see below). Cool Tumble Brief programme (approximately 10 minutes) that cools fibres or clothing. 1. Position the PROGRAMME knob on . 2. Select any Options, if required. 3. Press the START button . Options available: Alarm 5 Start and Programmes GB The Controls PROGRAMMES knob ! Warning, if after pressing the start button, the programmes knob position is changed, the new position will NOT change the programme selected. ! Position 0, turning the knob to position 0 resets and cancels a programme. OPTION buttons / lights These buttons are used to customise the selected programme to your requirements. A programme must have been selected on the programme knob before an option can be selected. Not all options are available for all programmes (see Start and Programmes). If an option is not available and you press the button, the buzzer will beep four times. If the option is available there will be one beep and the option light above the button lights to confirm the selection. After the start button has been pressed only the Alarm option can be changed. Progress ( Drying, CoolTumble, Post Creasecare) / Delay (3hr 6hr 9hr 12hr) Lights When the light above the delay button is on, these lights flash to indicate the delay time is selected. During other programmes they indicate the progress of the dryer, each one comes on as the corresponding phase starts. Time Delay The start of some programmes (see Start and Programmes) can be delayed for up to 12 hours in 3hr steps. Ensure the water bottle is emptied before setting a delayed start. When a delayed start is in progress the light above the delay button will be on and the selected delay period light will flash (after the start button has been pressed). To set a delayed start, press the Time Delay button, and the light above the button will come on together with the 3hr delay light. Pressing the button again will advance the delay setting to 6hr, the 3hr light goes out and the 6hr light is on. Each time you press the button the delay setting advances 3 hours, as indicated by the corresponding light. If the 12hr light is on, pressing the button again will cancel the delay. You can also cancel the delay by turning the programmes knob to 0, wait for the buzzer to beep and then turn back to your selected programme. Pre Creasecare When a delayed start has been selected, the clothes are tumbled occasionally during the delayed period to help prevent creases developing. High Heat When available this button...
Эта инструкция также подходит к моделям:Сушильные машины - ISL79CS (1.12 mb)