Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Child protection Operation of the dryer may be protected against accidental changes of programs or functions. The function is activated by pressing the START button. By pressing any key the sound alarm signals that child lock is on. Relevant symbol flashes, and the display reads CHILD LOCK ON. If you want to set new drying program, or change additional settings, you must first remove the protection. Switching the function off: - during drying: If you want to interrupt the program or change settings, switch off the function temporarily by keeping the B button (MENU) pressed for 4 seconds. During this time the program can be stopped by pressing D button (see cf. Interruptions). Relevant symbol flashes on the display. The function is reactivated by pressing the D button (START). In case you fail to change anything within 15 seconds, the protection is automatically reactivated. Even if you stop drying by opening the door and child lock is temporarily switched off, it is automatically restarted if the door is closed within the next 15 seconds. If you switch off the protection in the menu during the interruption, it will no longer be active when the program continues. - after drying is completed: By pressing the B button (MENU) for four seconds after the drying program is completed, the protection is switched off permanently. This means that it will remain inactive also the next time you start the drying procedure. Otherwise the protection remains active till the next drying process. It is switched off by a four second pressing of B button (MENU), while the A button is turned to position “0”, so you can select the drying program or additional functions. Sound signal (audible warning) In default setting the sound signal is on. You may select to switch the sound signal off, or increase volume. Legend: sound signal off; normal sound signal setting; increased volume setting. If you switch the sound signal off the display indicates relevant symbol . Prior first drying remove the basket and any wrappings from the drum. Drying in a basket (only with some models) This function may be selected only at time defined drying. Default setting is off. When this function is selected, the anti-crease program is switched off. The basket drying function is used to dry sneakers or other things which you want to prevent from tumbling within the drum - max. load: 2,5 kg. Be careful to avoid things which are being dried to touch the drum as they may get stuck and thus damaged. During this function the basket remains still. Dry only clean sneakers. Wring them after washing to such extent that they do not drip water prior inserting into the dryer. After all functions are selected, move to the main menu with the MENU button. Display flashes START. If you agree with all selected functions, press START for the commencement of drying, otherwise select any other functions as preferred. After the machine had been switched off (program selector jog (A) is at the position “0”), all additional functions return back to their default settings, except for the sound signal and the child lock. • Drying process is turned on by pressing the START button. • If the preset delayed start was selected, the process will start when the preset time elapses. • Display indicates the program with all selected functions, and the beep signals the commencement of drying. • The display indicates different drying stages in their sequence, according to the selected program. Drying procedure Press the START button to confirm commencement of drying (program starts when the delayed start time elapsed) Maximum moisture level of laundry Laundry has reached ironing moisture level Laundry has reached the preset moisture level (slightly moist) Cooling down (10 minutes at the end of a particular program) End of drying. Empty the condenser tank (with condensation dryer). Clean the filter. EXAMPLE: Selected program: cotton, slightly moist, functions selected: delayed start, decreased temperature, child lock, no sound signal). - End of drying procedure At the end of the drying procedure the display indicates END and CLEAN FILTER, and the beep is heard. In case of condenser dryer the display intermittently flashes CLEAN FILTER - EMPTY CONTAINER. If the appliance is not switched off and/or the door is not opened, the anti-crease program switches on (according to settings from cf. Selection of additional functions) and the dryer continues with gentle tumbling. Pull the power lead from the socket and cut the power supply from the mains. • By the user Changing the program or the functions After drying be careful when extracting laundry from the appliance, as it may be hot! Prior any changes child lock must be deactivated! By pressing button D (START/PAUSE) the drying program is paused; display reads PAUSE. You can now change additional settings or basic programs. Press MENU to enter any menu and change additional settings or select another drying program. Confirm by pressing D (START/PA...