Оценок - 4, средний балл: 4 ( )

Производитель: Alliance Laundry Systems Размер: 3.07 mb Название файла: bce3f81a-437e-49f7-8396-b97bfa439c11.pdf Язык инструкции:

Some products will cause permanent damage if spilledon the cabinet. WA R N I N G To reduce the risk of electric shock, disconnect the electrical service to the dryer before cleaning. W043 The exhaust duct should be inspected after one year of use and cleaned if necessary. Inspect and clean exhaust duct every one to two years asrequired thereafter. The weather hood should be checked frequently tomake sure the dampers move freely, dampers arenot pushed in and that nothing has been setagainst them. Keep dryer area clear and free from combustible materials, gasoline and other flammable vapors and liquids. Do not obstruct the flow of combustion and ventilation air. NOTE: Verify proper operation after servicing. Motor Overload Protector The dryer’s motor overload protector stops the motor automatically in the event of an overload. After cooling, the overload protector will reset itself. Dryer can be restarted by pushing the timer knob in. If overload protector cycles again, remove the dryer from use and call the serviceperson to correct the problem. Control Panel Use only a damp or sudsy cloth for cleaning thecontrol panel. Some spray pretreat products may harm the finish on the control panel. NOTE: The wiring diagram is located inside the control panel. -15 802716 -16- 802716 Lint Filter The lint filter is located at the front of the dryer in the lower part of the door opening. CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. Remove lint filter cover, clean lint filter and replace cover. Annually remove lint filter and screw to vacuum the duct under it. DRY2025N Troubleshooting Try these troubleshooting tips before making a service call – You may save time and money! Dryer Symptom Possible Cause/Solution Dryer won’t start • For dryers equipped with a power cord, make sure the power cord is plugged all the way into the electrical outlet. • Make sure loading door is closed. • Push timer knob in to start dryer. • Make sure the laundry room fuse(s) isn’t blown or loose, or circuit breakers aren’t open. The dryer itself does not have an electrical fuse. An electric dryer has an electrical circuit with two fuses. • Check if motor overload protector has cycled. Wait 10 minutes and try again. Dryer won’t heat • Make sure timer is not in COOL DOWN setting or that Fabric Selector is not set at NO HEAT. • Electric dryers only – Some homes may have two fuses or circuit breakers for an electric dryer; both fuses or circuit breakers should be checked. Make sure the laundry room fuse(s) isn’t blown or loose, or that the circuit breakers aren’t open. The electric dryer itself does not have an electrical fuse. • Gas dryer only – Make sure equipment and main gas line valve is turned on. • Check exhaust duct to outside to see if it is kinked, blocked or needs cleaning. • Check weather hood to make sure flapper moves freely, has not been pushed in or has not been blocked. Dryer doesn’t dry clothes satisfactorily • Check exhaust duct to outside to see if it is kinked, blocked or needs cleaning. • Check weather hood to make sure flapper moves freely, has not been pushed in or has not been blocked. • Automatic cycle – Adjust to MORE or LESS DRY setting. • Timed cycle – Allow more or less time. • Clean the lint filter. • Make sure the load isn’t too small. Small loads may not tumble properly or dry evenly. • Check load being dried. Heavy items dried with lightweight items will not dry as quickly as the rest of the load. Refer to Sort section for proper sorting information. Dryer is noisy • Check dryer for foreign objects (nails, coins, bobby pins, metal, plastic toys, etc.). Remove items from dryer. • Make sure dryer is level. Uneven leveling can cause vibration. • Normal operating sounds include the tick of timer advancing, heat source going on and off, and humming of air moving through the dryer and exhaust system. Cycle advances too slowly • Automatic cycles advance slower...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: