Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Printed in U.S.A. © 2001 Illinois Tool Works, Inc. 901070-2 Contents Subject Page Introduction and Warranty ............................................... 2 An Overview of TrimMaster18™ Finish Nailer ............... 3 Safety Instructions...........................................................4 Battery and Charger ........................................................ 7 Fuel Cell and Metering Valve .......................................... 9 Preparing TrimMaster 18™ Finish Nailer for Use ......... 12 TrimMaster 18™ Finish Nailer Operation...................... 13 Fasteners and Applications ........................................... 14 Servicing ....................................................................... 15 Troubleshooting ............................................................ 17 The Impulse® battery charger system meets all safety requirements for power tools. Pis a trademark Paslode CORDLESS An Ilinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061 P CORDLESS Power Nailers are made in the U.S.A. and are protected by one or more of the following U.S. patents:* 4,403,722 4,483,280 4,483,474 4,522,162 *Other patents issued and pending. Paslode® is a member of: 1 Introduction and Warranty TrimMaster 18™ Finish Nailer Operating Manual This manual is intended to acquaint you with the Paslode Cordless 18 Finish Nailer. Unlike other power fastening tools, the Cordless 18 Finish Nailer is powered by an internal combustion linear motor. In simpler terms, your Cordless 18 Finish Nailer is powered by a motor similar to the one that powers an automobile. The Cordless 18 Finish Nailer ignites a fuel and air mixture to produce the energy to drive the motor, which in turn drives the fastener. The Cordless 18 Finish Nailer is totally self-contained. It carries its own fuel supply and battery, along with a supply of fasteners. For ease of use, this manual is divided into sections (see Contents). Each section of the manual is written with you, the tool operator, in mind. We have left out many of the technical terms so that you can easily understand how to get the maximum performance from your Cordless 18 Finish Nailer, and how to avoid damaging the tool or injuring yourself. But, to accomplish this, we need you to do two things: 1. READ THE MANUAL FROM COVER TO COVER BEFORE USING THE TOOL. 2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL. The Finish nailer should be handled like other power fastening tools that you use. Like most tools, when used improperly injury could result . If you are going to allow others to use the Finish nailer, it is your responsibility to make sure that they also read and comply with the instructions in this manual before attempting to operate the tool. Should you have questions about the Finish nailer, or wish to obtain additional copies of this manual, please contact your Paslode® representative. The space below is provided so that you may record your representative's name, address, and telephone number. For the nearest Paslode representative call 1-800682- 3428 Name Address City State Zip Telephone Number Cordless Warranty and Limitations Paslode warranties that new Cordless power fastening tools, WARRANTY STATEMENT parts and accessories will be free from defects in material and workmanship for the period shown below, after the date of Paslode's sole liability hereunder will be to replace any part or accessory delivery to the original user. which proves to be defective within the specific time period. Any replacement part or accessory provided in accordance with this warranty will carry a ONE-YEAR LIMITED WARRANTY warranty for the balance of the period of warranty applicable to the part it replaces. This warranty does not apply to part replacement required due A one-year warranty will apply to all parts, except those listed to normal wear. below as normal wearing parts, or parts which are specifically covered by an extended warranty. This warranty is void on any tool which has been subjected to misuse, abuse, accidental or intentional damage, use with fasteners, fuel, batteries, or battery chargers not meeting Paslode specification, size, or quantity, FIVE-YEAR EXTENDED LIMITED WARRANTY improperly maintained, repaired with other than genuine Paslode replacement parts, damaged in transit or handling, or which, in Paslode's A five-year warranty will apply to all molded nylon parts: opinion, has been altered or repaired in a way that affects or detracts from • Cap and Grille the performance of the tool. • Handle Halves and Actuator • Trigger PASLODE MAKES NO WARRANTY, EXPRESSED OR IMPLIED, RELATING TO MERCHANTABILITY, FITNESS, OR OTHERWISE, EXCEPT AS STATED ABOVE, and Paslode's liability AS STATED ABOVE 90-DAY LIMITED WARRANTY AND AS ASSUMED ABOVE is in lieu of all other warranties arising out of, or in connection with, the use and performance of the tool, except to the A 90-day warranty applies to the following parts, which ar...