Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
They drive 16-gauge 1"wide-crown staples in lengths from 3/a" to Vk". Applications: The SPS Roofing Stapler is widely used in composite shingle roofing and reroofing applications as well as roofing felt installation. The two general industrial models are used for lath wire attachment, insulation attachment, furniture and cabinet assembly, and carton-to-skid attachment in packaging. Features: • Easy Load/E-Z Clear System • Drives Vk" length wide-crown staples into hardwoods and through roofing shingles • Oil-free, no lubrication required • Only two moving O-rings • Quiet operation • Mode of operation - either bottom fire/trigger fire or trigger fire • Special wear plate and hardened safety on roofer model resists granule abrasion • 35% more power • Ergonomically designed handle • Die-cast housing, one-piece piston driver assembly and rolling diaphragm increases life, cuts downtime SBCT wiiiiiiii I Rooting and Medium-Duty Stapler SPS Tool Specifications: Tool Weight: 5.3 lbs. Height: 9 7/s" Length: 13/2“ Width: Main Body 31/32 Staple Capacity: 140+ Mode of Operation: either bottom fire/trigger fire tools or trigger fire tools are available* Operating Pressure Range: 70-120 p.s.i.g. Tool Model Fastener Range 11/2" Roofer 340005N P12-P17 11/4" Industrial 340002N P11-P15 11/2" Industrial 340004N P12-P17 Any of the SPS models above can be adapted to drive V2" through 3/4" P staples by ordering and installing P/N FAO 155. A modified magazine assembly is required to drive 13/4" and 2" staples. Tool Specifications: Fastener Specifications: P Series Staples • Crown: 1" (25mm) • Wire Size: 16 Gauge (1.6 mm) Lenqths Inches 3/4" 7/8" 1" 11/4" 11/2" Millimeters 19 22 25 32 38 Part No. P11BAB P12BAB P13BAB P15BAB P17BAB Staples/Box 10/M 10/M 10/M 10/M 10/M Boxes/Carton 1 1 1 1 1 NOTE: All part numbers shown are for galvanized carbon steel staples with chisel point and SencotePlus®. Companion SENCO Tools: The PW drives P08, P10, P11, P12, P13, and P15. The MW drives P11, P12, P13, P15, P17, and P19 (with modified magazine). 3/4 P11 11/4 1/2 P15 P17 * “Restrictive Trigger” activated tools are used for applications where precision nail or staple placement is desired. You must first depress the safety element where you want to drive a nail or staple and then pull the trigger. After each nail or staple is driven, completely release the trigger and lift the tool off the work surface. “Dual Action” activated tools are used for applications where high-production work is desired. There are two modes of operation: Bottom Fire Method:This method of operation is sometimes called bounce firing. You must keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element where you want to drive a nail or staple. Trigger Fire Method: First depress the safety element where you want to drive a nail or staple and then pull the trigger. For instructions on safe use of tools with either of these activating mechanisms, please refer to the Operating Instructions or Customer Satisfaction and Safety Reminder contained in your tool carton. For additional information on how Senco fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized Senco Dealer or Distributor listed in the Yellow Pages under “Staples," or call our toll-free Action Line: 1-800-543-4596. ©1998 by Senco Products, Inc. Order MK313 (7.5AMP1098) Litho in U.S.A. Safety First. The only way to work.®...