Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
(3) Spin for 1-2 minutes. (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling. (3) Close the outer cover of the spin tub. Spin for 1-2 minutes. SPINWASH 11 Rinse with stored water 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 4.0 kg, please use "Standard" current. If you use "Strong" current, it may splash. If the water flows out from the overflow holes, it means that water filling quantity is too much. Rinsing (Repeat the midway spinning and rinsing with stored water for 2-3 times) OVERFLOW If the water flows out of the overfill holes, that is over- filling, please twist the water tap to limit the water filling, to avoid influencing the life of the machine. 11 Rinse with stored water 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 4.0 kg, please use "Standard" current. If you use "Strong" current, it may splash. If the water flows out from the overflow holes, it means that water filling quantity is too much. Rinsing (Repeat the midway spinning and rinsing with stored water for 2-3 times) OVERFLOW If the water flows out of the overfill holes, that is over- filling, please twist the water tap to limit the water filling, to avoid influencing the life of the machine. Spinning Spinning 1. Put the laundries into the spin tub Selection of the spin time list 3 evenly and smoothly. Spin time Laundries (minutes) Bed sheet or 2. Press the gland in the tub properly. About 4~5 blanket Close the inner and outer cover of the spin tub. Underwear About 2~4 (knitwear) Swear About 1~2 3. Spin (chemical fiber) Select suitable spin time according Blending thin to the laundries, and do spinning. Within 1 minute laundries During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to resume the spinning. 12 To do spinning and draining together, please first do spinning for around 1 minute, then do draining. Otherwise the spinning will stop owing to too much water stored in the spin tub. Disposal after washing After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) 2. Clean the lint Put it in water and clean while it is still wet.(See to Figure 2) 3. Install the lint filter After cleaning, insert the bottom of the lint filter into the filter frame , then push the upper part of the filter in . (See to Figure 3) Figure 2 Figure 1 Figure 3 Cleaning the filter frame Too much lint on the filter frame will influence the normal usage of the machine. Please clean it every two months. Take off the filter frame. Elastic fixing As indicated in the figure, nip the elastic fixing claw claw and pull it to the direction of the arrow to take it off. 13 Hook 2. Cleaning the filter frame Clean the lint around the frame and flush with tap water. 3. Install the filter frame. (1).Insert the mounting plate at the bottom of the frame into the valve cover. (2).Hang up the hook at the left upper side. (3).Push the upper part in as indicated in Figure 2. Cleaning the filter frame Figure 2 Cleaning the filter frame Figure 2 Disposal of the complete unit Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Thinner Alcohol Petrol After washing, dismount the water inlet hose. Do not store water in the tub for long period. Discharge the water immediately after each using. Pull off the power plug and hang up the power cord. Hang up the drain hose. Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them. 14 Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or ...