Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. Direct dissolved in the machine: 1.Fill small quantity of water. 2.Add the powder . Run for 30 seconds to dissolve it completely. 3.Put it in the laundries. Select suitable water level. The instant dissolving of the washing powder: 1.Prepare warm water of 30 C and a container. 2.Add the powder while stirring to fully dissolve it. The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity. Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7 Washing sequence Water-filling selector handle Overfilling sign Wash timer Wash selector Water-filling entrance Buzzer Spin timer (To set to below 2 minute, (Standard current, (The buzzer will ring when (to set to below 1 minute, first set to 6 minute then strong current) the service life of the timer). the washing finishes) first set to 2 minute then turn it back. it can increase turn it back. it can increase the service life of the timer). BUZZER OFF OFF SILK OFF WOOL MAX COTTON SPIN TIMER LINEN WASH TIMER DRAIN STRONG STANDARD WASH SELECTOR Wash 8 OFF Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 SPINWASH WASH TIMER 1.Water inlet selector (1) Set the water inlet selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. 3.Put in the laundries. If the water quantity is insufficient, please add water. 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) 5.Select the washing time Select the washing time according to the laundries. (Figure 4) 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). STANDARD STRONG DRAIN WASHSELECTORWASH SELECTOR STANDARD STRONG DRAIN WASHSELECTORWASH SELECTOR SILK WOOL COTTON LINEN 9 Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling. (3) Close the outer cover of the spin tub. Spin for 1-2 minutes. SPINWASH 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes. 3.Run the foam-removing spinning. 9 Midway spinning Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Open the outer cover of the spin tub. (2) Set the water-filling selector control rod at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling. (3) Close the outer cover of the spin tub. Spin for 1-2 minutes. SPINWASH 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes. 3.Run the foam-removing spinning. Rinse with stored water Rinse with water-filling 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "Standard" current. If you use "Strong" current, it may splash. Rinsing (Repeat the midway spinning and rinsing with stored water for 2-3 times) 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. OVERFILL If you find water flo- wing out here,please twist the water tap to limit the water filling. 10 Rinse with stored water Rinse with water-filling 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.4kg, please use "Standard" current. If you use "Strong" current, it may splash. Rinsing (Repeat the midway spinning and rinsing with stored water for 2-3 times) 1.Put the ...