Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
By choosing our Washing machine you not only found the best in advanced technology, but above all you have found a faithful, untiring and reliable friend. Your machine is strong, reliable and long lasting. All those qualities which have made the our trademark famous the world over. From today, these qualities are at your disposal to help you resolve your daily household problems. Your machine is easy to use. Read this owner's manual carefully since contains all the instructions for safe installation, use and maintenance. Remember to keep your owner's manual in a safe place so that you can refer to it whenever you need to. FUNCTION INTRODUCTION.....................................................3-5 INSTALLATION...........................................................................6-8 CLOSE UP................................................................................9-11 USING INSTRUCTIONS..........................................................12-16 MAINTENANCE...........................................................................17 SOLUTION TO PROBLEMS................................................18-19 ATTACHED CHART: GUIDE FOR SELECTION GPROGROMME...........................20-21 WARNING....................................................................................22 FUNCTION INTRODUCTION FUNCTION COMPARING TABLE MODE WNA600T WNA500T FUNCTION 5 5 Washing capacity Programmes 16 Cotton Synthetic Wool Thermostat ajustable(0-90 C) Cold wash button 16 Economic wash button No soak Spin speed 500r/min Power switch ON/OFF Rinse Plustic tub Door-locking device Power Power(Wash) 600r/min 330W Power(Spin) 330W 650W Weignt 650W 67Kg 67Kg 850X520X595 H.W.D FUNCTION INTRODUCTION Characteristics of WNA600T WNA500T European and Asia Aesthetic design, elegant and beautiful. Three types of wash: rinse, beat and rain effect. Changeable washing function: cold wash and hot wash,No soak Three types of laundry: cotton, synthetic and wool, with 16 cycles. A large washing capacity: 5 kg. Stainless steel drum; painted cabinet with three layers of cataphresis, phosphorus and paint. Rinse with anti-crease system, care for clothes. Super anti-shock design. Self-lock device for the door. Installation Unpacking levelling and positioning Remove the package and check that the machine is undamaged. If you have any doubts, do not use the machine and call on a qualified technician. Keep all packing parts (plastic bag, foam rubber, screws etc.) out of the reach of children since they could be dangerous. Important: The inside of the washing machine which consists of a floating unit, is fixed with screws at the back of the cabinet (Fig.1) during transport. Before starting the machine remember to release the floating unit by removing the above screws . To prevent water spray from entering the machine, remember to close the holes left open by the screws with the plastic caps provided in the packet containing the owner's manual. And rescrew the holes where the iron piece is taken down with the former two screws.Attention:keep the packing screws and plastic caps in a safe place for later use. It is important for the machine to be perfectly level (the angle of inclination on the work surface must not be more than 2 degrees). For this reason the machine is fitted with adjustable feet used for levelling the machine before use (Fig.2). In the case of flooring with carpeting, remember to check that the ventilation in the support area is not plugged. Fig.1 Fig.2 Installation Electric connection Connect the plug to a socket provided with efficient earthing. Or use the spare earthing wire supplied together with the machine and the earthing terminal located on the left-upper corner of the back of your machine (Warning: this appliance must be earthed as a safety measure according to the law). Make sure that the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine (power range:187-242V) and that the electric system is dimensioned to withstand the maximum current shown on the data plate. If the socket the machine is connected to does not correspond with the plug, replace the plug with a suitable one and avoid using adaptors or shunts since they could cause overheating and burn out.The spare eathing wire is absolutely not allowed to be connected to water pipe,heating pipe or other kinds of pipes. Connection Connect the inlet hose to a cold water tap with a 3/4 gas of tap and threaded opening, and fit the filter and the rubber gasket Loading supplied with the washing machine. Check that it is tightly Hose screwed to the tap (Fig. 3). Fig. 3 If the water piping is new or has not been used for a long time, before making the connection, let the water run until it is clear and free from impurities. This step is necessary to ensure that the incoming water does not clog and possibly damage the machine. Installation Connection of the Drain Hose Connect the drain hose to a drain duct ...
Эта инструкция также подходит к моделям:Стиральные машины - WNA500T (229.1 kb)