Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
• Do not operate the product when fatigued or under the influence of alcohol or drugs. • Do not stand on unstable surfaces. Stand with both feet balanced at all times. • To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands. • The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. Extension Cords Use a sufficient gauge: Up to 25 ft = 12/2 AWG; 25 to 50 ft = 10/2 AWG. Use only extension cords that are intended for outdoor use. These extension cords are identified by the marking “Acceptable for use with outdoor appliances; store indoors while not in use.” Use only extension cords having an electrical rating not less than the rating of the product. Do not use damaged extension cords. Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank on any cord to 2 tems of insulation are provided instead of grounding. No grounding method is pro- vided on a double-insulated product, nor should a method for grounding be added to the product. Servicing a double-insu- lated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words, “DOUBLE INSULATED.” Caution • Follow the maintenance instruc- tions specified in the manual. • This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty. IMPORTANT PRECAUTIONS – continued Water Supply (Cold Water Only) • Water hose must be at least 3/4 inch in • The water supply temperature must not diameter. exceed 104°F/40°C. • Flow rate of water supply must not fall • Never use the pressure washer to draw in below 2.5 GPM (gallons per minute). water contaminated with solvents, e.g. • Flow rate can be determined by running paint thinners, gasoline, oil, etc. the water for one minute into an empty • Always prevent debris from being drawn 5-gallon container. into the unit by using a clean water source. ASSEMBLY INSTRUCTIONS You will need a standard screw driver OR a Torx T-25 screw driver 3 Step 1 Attach the mobile adapter brackets to Step 2 Spread handle sides the pressure washer. Align holes on the bottom apart and align with slotted areas of of the pressure washer as shown and tighten the mobile adapter brackets and snap into 4 screws. position. Tighten the 4 screws. Step 3 Slide the hose caddy into the handle slots and snap into place. Step 4 Slide the spray wand extension into the gun. Turn the wand collar clockwise onto the gun threads until tight. OPERATING INSTRUCTIONS Step 1 Connect the high pressure hose to the unit’s high pressure outlet. Step 2 Insert the spray wand of your choice into the wand extension. Push in and turn clockwise to lock spray wand in place. Step 3 Connect garden hose to unit’s water inlet. Step 4 Connect garden hose to the cold water source and turn water on completely. Step 5 Plug the p...
Эта инструкция также подходит к моделям:Стиральные машины - K 260 M (781.68 kb)
Стиральные машины - K 260 M (781.68 kb)
Стиральные машины - K 260 M (781.68 kb)
Стиральные машины - K 260 M (781.68 kb)