Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
It remains set until cancelled again. When the additional rinse has been set, the RINSE+ indicator flashes on the display before the programme starts and during the additional rinse. 4. If you want to check whether the additional rinse has been set: – Turn the programme selector to SHORT SPIN. – Push the SENSITIVE button briefly. If RINSE+ flashes on the Programme Progress display, the additional rinse has been set. To cancel the additional rinse: 0 1. Turn the programme selector to SHORT SPIN. 2. Press and hold the SENSITIVE button for at least 5 seconds. As soon as the button is pressed, RINSE+ flashes on the Programme Progress display. After 5 seconds, RINSE+ stops flashing and remains lit continuously for another 5 seconds. 3. While RINSE+ is lit continuously, release the SENSITIVE button. When RINSE+ is no longer lit, the additional rinse has been cancelled. 3 An additional rinse cycle increases water consumption and the programme duration. Operating Instructions Water cooling It may be necessary to cool the water before draining, to prevent thermal damage to the plastic outlet pipes. 3 The water is cooled before draining out at the end of the main wash (by adding cold water). (This setting is only available with the COTTONS/LINEN, EASY-CARES programmes, with temperatures over 40 °C.) When the washing machine is delivered, water cooling is not set, except for the SENSITIVE programme option. To set the water cooling function: 0 1. Turn the programme selector to SHORT SPIN. 2. Press and hold the PRE-WASH button for at least 5 seconds. When the button has been pressed for 5 seconds, MAIN WASH flashes on the Programme Progress display for 5 seconds. 3. While MAIN WASH is flashing, release the PRE-WASH button. When it stops flashing, water cooling has been set. The function remains set until cancelled again. 4. If you want to check whether water cooling has been set: – Turn the programme selector to SHORT SPIN. – Press the PRE-WASH button briefly. If MAIN WASH flashes on the Programme Progress display, water cooling has been set. To cancel water cooling: 0 1. Turn the programme selector to SHORT SPIN. 2. Press and hold the PRE-WASH button for at least 5 seconds. As soon as the button is pressed, MAIN WASH flashes on the Programme Progress display. After 5 seconds, MAIN WASH stops flashing and remains lit continuously for another 5 seconds. 3. While MAIN WASH is lit continuously, release the PRE-WASH button. When MAIN WASH is no longer lit, water cooling has been cancelled. 3 The water cooling function raises water consumption and extends programme time. Additional rinse cycle and water cooling You can combine the additional rinse and water cooling functions. Set the two functions as described under "Additional rinse cycle" and "Water cooling". Operating Instructions Variomatic spin The variomatic spin is integrated into the final spin. The washing does not cling to the side of the drum as much and can be taken out more easily. This can be set with the COTTONS/LINEN, EASY-CARES programmes. To set Variomatic Spin: 0 1. Turn the programme selector to SHORT SPIN. 2. Press and hold the STAIN button for at least 5 seconds. When the button has been pressed for 5 seconds, the END light flashes on the Programme Progress display for 5 seconds. 3. While END is flashing, release the STAIN button. When it stops flashing, Variomatic Spin has been set. It remains set until cancelled again. 4. If you want to check whether Variomatic Spin has been set: – Turn the programme selector to SHORT SPIN. – Press the STAIN button briefly. If the END light flashes on the display, Variomatic Spin is set. To cancel Variomatic Spin: 0 1. Turn the programme selector to SHORT SPIN. 2. Press and hold the STAIN button for at least 5 seconds. As soon as the button is pressed, the END light flashes on the Programme Progress display. After 5 seconds, the END light stops flashing and remains continuously lit for another 5 seconds. 3. While END is continuously lit, release the STAIN button. When END is no longer lit, Variomatic Spin has been cancelled. Operating Instructions Programme Protection To protect a programme setting against unintentional changes or tampering (for example, programme selector turned or buttons pressed accidentally, etc.), set the Programme Protection. This will protect your washing from damage. 3 The Programme Protection can be set or released at any time while the programme is running. Setting the Programme Protection: 0 1. Set the desired programme. 2. Press the START/PAUSE button to start the programme. 3. Press and hold the PRE-WASH and SENSITIVE buttons at the same time, for around 5 seconds. The programme progress display flashes for 5 seconds; The Programme Protection is now set. 3 No other settings can be selected as long as the Programme Protection is active. The door cannot be opened with the DOOR/LIGHT button. Also, when the wash cycle is completed, the Programme Protection must be released before the door can...