Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
For areas with very soft water or to further improve the washing result. The lamp lights up if ) plus (water plus) was selected. The temperature can be individually adjusted for each programme. To set the temperature, press the °C temp. (temperature) repeatedly until the required temperature is displayed. The spin speed can be individually adjusted for each programme. To set the spin speed, press the 0 centrifug. (Spin) button repeatedly until the required spin speed is displayed. If Rinse stop is desired, the spin speed is reduced to 0 rpm. The laundry remains in the last rinsing water. Appropriate for delicate fabrics and curtains . page 14. The automatic unbalanced load detection system ensures even distribution of the laundry by starting to spin several times. If the laundry is extremely unevenly distributed, the speed of the final spin is reduced or the spin cycle is not performed for safety reasons. You can delay the start of the programme before it begins. Using the remaining time, you can determine when the selected programme is to end. The remaining time can be set in increments of one hour up to a maximum of 24 hours. Press the 5 diferida (Delay) button repeatedly until the required number of hours is displayed. Then press the ! inicio/ pausa (Start/Pause) button; the start of the programme is delayed according to the remaining time set. The time remaining until the end of the programme is shown in the display panel. Press ! inicio/ pausa (Start/Pause) to start the selected programme. The programme progress is shown using illuminated indicator lamps: preparado (Ready) lavado (Wash) – After switching on the washing machine, the lavado (Wash) (Ready) indicator lamp flashes. – When the programme starts, lavado (Wash) lights up permanently. aclar./enxag. (Rinse) – Lamp lights up permanently during the rinsing cycle. – Rinse stop selected: all indicator lamps are switched off. centrifug. (Spin) – Lights are on permanently during the spin cycle. – When spinning finishes, centrifug. (Spin) (End) flashes. fin/fim (End) – “Ys appears in the display panel. Washing Washing End of programme Rinsestop Changing the programme . Turn the programme selector to the desired programme, e.g. normal resistentes algod. (Cottons) 60°C. . The lavado (Wash) (Ready) indicator lamp flashes . Change the spin speed or Rinse stop (. page 13) and temperature if required. . Load the laundry . page 8. – Observe the maximum load, Programme table . page 28. . Press the ! inicio/ pausa (Start/Pause) button. – The washing programme starts. – The lavado (Wash) indicator lamp lights up. The washing programmes are ended automatically. “Ys appears in the display panel. . Turn the programme selector to stop (Off). . Remove the washing from the drum. . Leave the washing machine door open so that the inside of the washing machine can dry. . Turn off the tap. If the spin function was deactivated at the start of the wash cycle, (no final spin = laundry remains in last rinsing water), the washing programme is automatically stopped after the final rinse. The display panel shows †.‹. alternating with AA:AA. In order to empty the rinsing water and, if required, spin the laundry: Press the 0 centrifug. (Spin) button repeatedly until the desired spin speed is set. The water is emptying; the washing machine is in spin cycle. The programme has ended when ‹‹‹‹ appears in the display panel. The maximum spin speed depends on the selected washing programme. If you do not wish to spin the laundry: . Set the programme selector to X (Empty). The water is emptying and the washing machine is not in spin cycle. The programme has ended when “Ys appears in the display panel. . Turn the programme selector to stop (Off). . Remove the laundry. . Leave the washing machine door open so that the inside of the washing machine can dry. You have selected the wrong programme by mistake: . Reselect the programme. .‘—† appears in the display panel. . Press ! inicio/ pausa (Start/Pause). The new programme starts from the beginning. Programme termination Press and hold the ! inicio/ pausa (Start/Pause) button until .‘—† appears in the display panel. For washing programmes at high temperatures: – Allow laundry to cool: Select q/0 (Rinse + Spin) – Select ! inicio/ pausa (Start/Pause). For programmes at low temperatures: – Select q/0 (Rinse + Spin) or X (Empty). – Select ! inicio/ pausa (Start/Pause). Reset function: – Using the reset function you can return to the original settings. To do this, press and hold the ! inicio/ pausa (Start/Pause) button until ‹‹‹‹ appears in the display panel and the three programme progress indicator lamps light up. Cleaning and care Safety information Housing and control panel Washing drum Detergent drawer Descaling the washing machine Risk of electric shock You must first disconnect the appliance from the mains. Never clean the washing machine with a water jet. Risk of explosion. Never clean the washing machine with solvents. Risk of scalding Hot...
Эта инструкция также подходит к моделям:Стиральные машины - 3TI62101A/02 (1.09 mb)
Стиральные машины - 3TI62101A/03 (1.09 mb)
Стиральные машины - 3TI62121A/01 (1.09 mb)
Стиральные машины - 3TI62121A/02 (1.09 mb)