Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
load for the selected programme is displayed when the door is open. The remaining time or finish-in time is displayed when the door is closed. Drying status (Auto dry mode/Time dry duration/OFF) ** * Display shown may vary depending on the model and selected programme. ** Only when the drying programme is available. ..Option buttons You can change the spin speed and temperature even while the selected programme is running. The effects depend on the progress of the programme. °C Temp. ..You can change the indicated washing temperature. The maximum washing temperature which can be selected depends on the programme that has been chosen. ..Page 7 ..Washing: On if wash process is running. ....Rinse: On if rinse process is running. ..Spin: On if spin process is active. ....Drying: On if drying process is active. Automatic load detection: Automatically detects the load size after water inlet phase and sets accurate remaining time. Symbols indicate small, middle and full loads measured * according to the recommended max. load of the selected programme. * Automatic display of the detected load only for washing programmes with a max. load recommendation > 3.0 kg except for Rinse/Spin ../and Drain ... Different types of textiles with different water absorption rates may influence the load display. ..Tap is: Flashing if tap not open or no water supply. On if low water pressure. This will extend the programme. ....Overdosage: Foam detected. Maybe too much detergent. ......Door:..On if door can be opened. ....Childproof lock: On if childproof lock is activated. Flashing if there is misoperation. Activate/deactivate childproof lock. ..Page 10 kg, *:..maximum load recommendation in kg for selected washing/drying programme...Page 7: Programme overview Time, e.g. *: programme remaining time, or *....Finish-in time defined by user. ..Page 10 Dry, drying mode and drying time: : Auto dry mode 1. : Auto dry mode 2, extra dry for drying programme. : Drying programme is off; *: Time dry for solo drying programme, drying time defined manually. ..Page 10: ..button : On if programme is in pause. :On if door can be opened when programme was paused. : End of programme, or :..end of programme with the ..setting. *: Set volume of signals. ..Page 10 *:..Information on the display. ..Page 11 Display and Option buttons * Programme setting with maximum spin speed for testing according to or in accordance with AS/NZS 2040.2 and AS/NZS 6400. ** Programme setting for testing in accordance with IEC60456. *** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambiente tempera. ture,type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions. **** Programme setting for testing according to or in accordance with AS/NZS 2442.2 and AS/NZS 6400. (3L rinse water is for clean condenser) 8 10 .. Finish in When you select a programme, the respective programme duration is displayed. You can delay the start of the programme before it begins. The finish-in time indicates when the programme will be finished. It can be set in hour increments up to a maximum of 24 h. Press and hold the Finish in ....button until the required number of hours is shown (h=hour). Select Start/Reload .., the..door is locked. ....Spin speed You can change the indicated spin speed. The maximum spin speed which can be selected depends on the chosen programme. If .. is selected, the load is held in the rinsing water. .. Dry You can activate, deactivate and set the drying function by touching this option button. Mode of..washing and drying without interruption is auto dry only; when single drying programme is..selected, you can choose auto dry, or time dry with desired drying time. ....Page 8 .. Additional functions See also Programme overview ....Page 7 .. Prewash For heavily soiled laundry. Prewash at max. 30°C. ....Rinse plus Additional rinse cycle. Prolonged programme duration. For areas with very soft water or for further improving the washing result. .. Less Iron Special spin sequence with subsequent fluffing. Gentle final spin . residual moisture in the laundry increased slightly. ......Intensive Extends the washing time for a more intensive washing of..heavily soiled items. .. Start/Reload .. For starting or pausing the washing/drying programme. .. Signal volume (for button signal and information signal) .. Childproof lock .............. Programme will not be changed by accidental operation. To activate the childproof lock: . After the programme starts or finish in time being activated ....Page 10, press and hold the Finish in .. button for 5 seconds.; . Release when the .. symbol lights up. If button signal is on, an acoustic signal will be heard. When the programme ends, the Start/Reload .. indicator remains on to remind you to deactivate the childproof lock. To deactivate the childproof lock: . Touch the Finish in .. button until the .. symbol turns off. . Re...
Эта инструкция также подходит к моделям:Стиральные машины - WVH28440AU/02 (3.19 mb)
Стиральные машины - WVH28440AU/03 (3.19 mb)
Стиральные машины - WVH28440AU/04 (3.19 mb)
Стиральные машины - WVH28440AU/05 (3.19 mb)