Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
4. Wait 5 mins., empty the condensation container again. 5. Turn the programme selector to Stop (Off). Transport . Preparation of dryer -> see Frost protection. . Transport the dryer in a vertical upright position. . Following transportation, leave the dryer to stand for one hour. The dryer contains residual water; this can flow out if the dryer is tilted. 1. Take all accessory parts out of the drum. The drum must be empty. Make sure that the air inlet remains unobstructed Clean and level 2. Do not operate the dryer if there is a danger of frost. Do not set up the dryer behind a door or sliding door as this may obstruct or prevent the dryer door from opening. This will prevent a potentially fatal danger to children from locking themselves in. 9 Technical data ..Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable) Weight approximately 53 kg Max. capacity 7 kg Condensation container 4.0 l Connection voltage 220-240 V Connected load max. 1000 W Fuse protection 10 A Ambient temperature 5 -35 °C Product number/ Production number Inside of door You can find the rating plate on the back of the dryer. ..Consumption rates These are guide values determined under standard conditions. Spin speed in rpm (residual moisture) Drying time** in min. Energy consumption** in kWh Resistentes / Algod. (Whites/coloureds) 7 kg Seco p/guardar (cupboard dry)* 1400 (approx. 50 %) 112 1.35 1000 (approx. 60 %) 131 1.60 800 (approx. 70 %) 150 1.86 Seco ....(iron dry)* 1400 (approx. 50 %) 80 0.96 1000 (approx. 60 %) 99 1.22 800 (approx. 70 %) 118 1.47 Sinteticos (Easy-care) 3.5 kg Seco para guardar (cupboard dry)* 800 (approx. 40 %) 51 0.56 600 (approx. 50 %) 63 0.70 *Test program according to DIN EN 61121 **The values may differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in the fabric and loading capacity. ..Drum interior light (bulb E14, 15 W) The drum is illuminated after the door is opened or closed, and also after the programme is started. It goes out automatically. Replacing the bulb -> Page 10. Optional accessories Order no.: Washer-dryer stack connection set The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. This connection set must always be used to secure the dryer to the washing machine. Installation underneath the worktop Risk of electric shock! Instead of the appliance covering plate, you must have a metal cover fitted by an expert. WTZ 11330 WTZ 10290 10 What to do if ... Repairs must only be carried out by the aftersales service or an authorised expert. Before you contact the after-sales service, please make sure that you are unable to resolve the problem yourself. You will be charged for advice if a technician is called out, even during the warranty period. You can find your nearest customer services in the enclosed list. When contacting the after-sales service, please specify the product number (E-Nr.) and production number (FD) of your appliance (see inside of door). ..The Inicio/Stop (Start/Stop) indicator lamp does not light up. Mains plug plugged in? Programme selected? Check the socket fuse. ..The ..symbol and Start/Stop indicator lamp flash. Empty the condensation container. Clean the condensation container filter if necessary ->Page 6. ..The ..symbol and Start/Stop indicator lamp flash. Clean the fluff filter -> Page 4. ..Dryer does not start. Inicio/Stop (Start/Stop) button selected? Door closed? Programme set? Ambient temperature greater than 5 °C? ..Water is leaking out. Make sure the dryer is level. ..The door opens by itself. Push the door closed until you hear it engage. ..The required degree of dryness was not achieved or the drying time was too long. Clean the fluff filter -> Page 4. Empty condensation container -> Page 4. Ambient temperature higher than 35 °C -> airing. Air inlet may be blocked -> keep unobstructed. Was an unsuitable programme selected? -> Page 7. Laundry too dry? The laundry in a dryer with a heat exchanger requires sufficient residual moisture. Has the dryer been installed with sufficient space on all sides? Ensure that air can circulate. Mains failure -> Restart the dryer. Fine layer of scale on the moisture sensors -> Clean the moisture sensors -> page 6. ..Laundry damp. Use the next drying programme up or use the timer programme as a supplement -> Page 7. Warm laundry feels damper than it really is! ..The moisture content of the room has increased significantly. Make sure the room is sufficiently ventilated. Air inlet blocked? -> keep unobstructed. ..Cln appears in the display panel. Not an error! Automatic cleaning of heat exchanger. Do not empty the condensation container. ..Mains failure. Remove laundry from the dryer immediately and spread out. This allows the heat to dissipate. ..The interior light is not working. Pull out the appliance plug, remove the cover cap in the interior above the door (use Torx 20 screw driver) and replace the bulb. Close the cover c...