Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
This means that the dust bag (16) is full or that the hose, tube or filters are blocked. If this occurs, follow the instructions for changing the dust bag, cleaning the filters and unclog hose or tube. Changing the dust bag (16) -Open the cover by pressing down the release button. (Fig. 12) -Take the dust bag out of the dust bag holder (17). (Fig. 13) -Close the bag by pulling on the central flap and scrap it into a dust bin. (Fig. 14) - To fit a new bag, fold the flap back (Fig. 15). Insert the bag into the bag holder, following the direction of the guide-arrow. Make sure that it slots fully down into its housing and that it fits correctly. Close the cover. Important: • There is a dust bag absence detector on the bag holder, the cover can not be closed if there is no bag fitted. Do not force it shut, check that the bag is fitted correctly. (Fig. 16) • If the suction is irregular and the bag full indicator stays lit, check that there is nothing blocking the hose, tube or air inlet. Replacing the motor protection filter (14) It is advisable to replace the motor protection filters after changing the paper dust bags five times. With no bag in the vacuum cleaner, take the filter together with the retainer (15) out and put a new one in. (Fig. 17) Never use the vacuum cleaner without this filter fitted. Cleaning and replacing the HEPA filter (13) The HEPA filter (13) should be cleaned regularly by knocking out the dirt and rinsing. -Open the cover, take out the filter. (Fig. 18) -Tap it or wash it with water and mild detergent. Then leave it to completely dry. -It is advisable to clean the HEPA filter at least after six uses. After being washed for ten times it should be replaced. Ionization Feature This vacuum cleaner contains an built-in negative ions generator. Ions are naturally occurring electrically charged particles. The ionizing feature can make the outlet air clean and fresh. (Fig. 19) ACCESSORY Upholstery nozzle (18) This accessory has been designed to clean all types of upholstery. Crevice nozzle (19) Use this accessory to vacuum crevices and deep grooves and nooks, etc. Hard floor tool (20) This tool has been specially designed to clean hard floor surfaces, tiles and terracotta, the soft hair bristles brush over the surface picking up the dust but without damaging the floor. Furniture nozzle (21) This accessory is ideal for vacuum cleaning furniture and other delicate surface, prevent surfaces from being damaged. TURBO BRUSH FOR RUGS & CARPETS (22) (Only for AC5015) This brush is specially designed for cleaning rugs and carpets. The rotating brush beats gently against the carpet fibers for deeper cleaning. XXL hard floor brush (23) (Only for AC5010XXL) The XXL hard floor brush has a 33 % larger cleaning surface than common models, to enable an especially thorough cleaning of hard floors, tiles and terracotta. The soft hair bristles pick up the dust without damaging the floor surface. ADVICE ON DISPOSAL: Our goods come in optimized packaging...
Эта инструкция также подходит к моделям:Пылесосы - AC5015/01 (1.66 mb)