Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Interrupt programme removing or adding laundry. The drying cycle can be interrupted for a brief period so that laundry may be added or removed. The selected programme must then be continued until it is finished. Hot steam may escape during the Steam Drying / Steam Refresh programmes. 1. Open the door. The drying cycle is paused. 2. Remove or add laundry and close the door. 3. If required, select a new programme and additional functions. 4. Press the Start/Stop button. Water tank filling hole with filter 34..2h; 1 -24 hrs y loud). 0, 1, 2, 3, 4 On-Off rogrammes the others. 0, 1, 2, 3 600-1800 ..idual requirements Inspecting the dryer oading laundry age 8. woollens. he programme rying programme ... he Start/Stop button nnecting the mains plug are sensitive, h is enough! 3 2 1 Drying / Short spin / Refresh Drying Emptying condensation Empty the container after each drying cycle, not during drying! 1. Remove the container, holding it level. 2. Pour out condensation. 3. Push the ..container back in until it clicks into place. Cleaning the fluff filter 1. Open the door, remove the filter and fold open. 2. Remove the fluff (by wiping the filter with your hand). 3. Close the filter, insert it again and close the door. 4. Remove fluff from the door and the area around it. Very dirty or blocked filters should be rinsed under warm water, and then dried thoroughly. Clean the filter in the water tank if it is dirty 1. Remove the condensation tank. 2. Remove the filter. 3. Clean the filter under running water. 4. Re-insert the filter and push in the condensation tank until it clicks into place. Switching off the dryer Turn the programme selector to Off. Do not leave damp laundry in the dryer. Removing the laundry The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for an hour (or two hours if you manually select the..Less Ironing function, depending on the model.) Condensation container Control panel Air inlet Fluff filter Drum Cover for steam nozzle Air cooler Programme end once ..lights up in the display. Interrupt programme removing or adding laundry. The drying cycle can be interrupted for a brief period so that laundry may be added or removed. The selected programme must then be continued until it is finished. Hot steam may escape during the Steam Drying / Steam Refresh programmes. 1. Open the door. The drying cycle is paused. 2. Remove or add laundry and close the door. 3. If required, select a new programme and additional functions. 4. Press the Start/Stop button. Water tank filling hole with filter 56Information on laundry ... Labelling of fabrics Follow the manufacturer's care information. ..Drying at normal temperature. ....Dry at a low temperature ..select..........Low Heat as well. ....Do not machine dry. Do not tumble-dry the following fabrics: . Airtight fabrics (e.g. rubber-coated fabrics). . Delicate materials (silk, curtains made from synthetic material) ..they may crease. . Oil-stained laundry. Drying tips . To ensure a consistent result, sort the laundry by fabric type and drying programme. . Close zips, hooks and eyes, and do up any buttons. Tie belts, apron strings etc. together. . Do not overdry easy-care laundry ..risk of creasing Allow laundry to finish drying in the air. . Do not iron laundry immediately after drying, fold items up and leave for a while ..the remaining moisture will then be distributed evenly. . Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly the first time they are tumble-dried. ..Do not select the Extra Dry programme. . Starched laundry is not always suitable for dryers ..starch leaves behind a coating that adversely affects the drying operation. . When washing laundry that is to be tumble-dried afterwards, dose the fabric softener according to the manufacturer's instructions. . With a small load, use the Timed Program. Tips for Steam Dry / Steam Refresh . Use your dryer for unwrinkling and refreshing fabrics. . Short spin cycle for reducing creasing. . Refresh cycle for reducinging odours from fabrics. Do not use Steam Dry / Steam Refresh for the following fabrics: . Wool, leather, fabrics with metal, wooden or plastic parts. . Wax and oil jackets. . Sort the laundry by colour and put on separate short Steam Dry / Steam Refresh cycles to prevent the colours from bleeding. . These programmes do not remove stains ..stains must be treated and removed beforehand. . For best results, so that the laundry will have as few creases as possible, remove each item immediately after the programme has finished and hang on a hanger to finish drying. Pull clothes into shape if required. Environmental protection/energy-saving tips . Before drying, spin the laundry thoroughly in the washing machine ..the higher the spin speed, the shorter the drying time will be (consumes less energy), also spin easy-care laundry. . Use the maximum recommended capacity, but do not exceed it ..page 7, .Programme overview.. . Make sure the room is w...
Эта инструкция также подходит к моделям:Стиральные машины - R8580X0GB/30 (1.28 mb)
Стиральные машины - R8580X0GB/35 (1.28 mb)
Стиральные машины - R8580X0GB/38 (1.28 mb)