Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Do not use benzene, thinner or alcohol to clean the appliance. -This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the appliance from the wall socket. - Failure to do so may result in electric shock or fire. safety information _11 contents SETTING UP YOUR WASHING MACHINE 13 WASHING A LOAD OF LAUNDRY 21 CLEANING AND MAINTAINING YOUR WASHING MACHINE 29 TROUBLESHOOTING AND INFORMATION CODES 33 CYCLE CHART 35 APPENDIX 36 13 Checking the parts 14 Meeting installation requirements 14 Electrical supply and grounding 14 Water Supply 15 Drain 15 Flooring 15 Surrounding temperature 15 Alcove or closet installation 15 Installing your washing machine 21 Washing for the first time 21 Basic instructions 22 Using the control panel 24 Child lock 24 Delay end 25 Washing clothes using the cycle selector 26 Washing clothes manually 26 Laundry guidelines 28 Detergent and additives information 28 Which detergent to use 28 Detergent drawer 29 Draining the washing machine in an emergency 29 Cleaning the exterior 30 Cleaning the detergent drawer and drawer recess 31 Cleaning the debris filter 31 Cleaning the water hose mesh filter 32 Repairing a frozen washing machine 32 Storing your washing machine 33 Check these points if your washing machine... 34 Information codes 35 Cycle chart 36 Fabric care chart 36 Protecting the environment 36 Declaration of conformity 37 Specifications 12_ contents setting up your washing machine Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry. CHECKING THE PARTS Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below. If your washing machine was damaged during shipping, or if you do not have all of the parts, contact Samsung Customer Service or your Samsung dealer. Detergent drawer Control panel Door Adjustable feet Work top Plug Drain hose Debris filter Emergency drain tube Filter Cover Tub Release lever Water supply Spanner Bolt hole covers Hose guide Cap fixer hose 01 SETTING setting up your new washing machine _13 setting up your washing machine MEETING INSTALLATION REQUIREMENTS Electrical supply and grounding To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance. Never use an extension cord. Use only the power cord that comes with your washing machine. WARNING When preparing for installation, ensure that your power supply offers: • 220V~240V 50Hz 15 AMP fuse or circuit breaker • Individual branch circuit serving only your washing machine Your washing machine must be grounded. If your washing machine malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. Your washing machine comes with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet. Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes. Improperly connecting the equipment-grounding conductor can result electrical shock. Check with a qualified electrician or serviceman if you are unsure if the washing machine is properly grounded. Do not modify the plug provided with the washing machine. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Water Supply Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut off completely. Or, it may take the washing machine longer to fill than what the controls allow, resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/ flooding if an internal hose becomes loose, is built into the controls.) The water taps must be within 4 feet (122cm) of the back of your washing machine for the provided inlet hoses provided to reach your washing machine. Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long. You can reduce the risk of leaks and water damage by: • Making water taps easily accessible. • Turning off taps when the washing machine is not in use. • Periodically checking for leaks at water inlet hose fittings. Before using your washing machine for the first time, check all connections at the water valve and taps for leaks.WARNING 14_ setting up your new washing machine Drain Samsung recommends a standpipe height of 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain ...