Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
No Spin ■ Spin Speed is available according to the program as follows. ■ WD-1238(0~9)S/N/T(U)P - Cotton, Eco, Quick 30, Rinse+Spin Rinse Hold - No Spin - 400 - 800 - 1000 - 1200 - Synthetic, Hand Wash/ Wool, Baby Care Rinse Hold - No Spin - 400 - 800 - 1000 - Delicate Rinse Hold - No Spin - 400 - 800 - Spin No Spin-400-800-1000-1200 • WD-1038(0~9)S/N/T(U)P - Cotton, Eco, Quick 30, Rinse+Spin Rinse Hold - No Spin - 400 - 600 - 800 - 1000 - Synthetic, Hand Wash/ Wool, Baby Care Rinse Hold - No Spin - 400 - 600 - 800 - Delicate Rinse Hold - No Spin - 400 - 600 - Spin No Spin-400-600-800- 1000 ■ WD-8038(0~9)S/N/T(U)P - Cotton, Eco, Quick 30, Rinse+Spin Rinse Hold - No Spin - 400 - 600 - 800 - 1000 - Synthetic, Hand Wash/ Wool, Baby Care Rinse Hold - No Spin - 400 - 600 - 800 - Delicate Rinse Hold - No Spin - 400 - 600 - Spin No Spin- 400-600-800- 1000 • If you choose the Cotton or Synthetic course,spin happens after Wash and Rinse except the last Rinse.After the last Rinse, program will stop after Drain. • There is no Spin during the whole process of the other Course. 3. Rinse Hold • Is selected by pressing the spin button repeatedly this function leaves clothes in the machine; suspended in the water after a rinse without entering into spin. • To proceed through to a drain or spin, once the rinse hold function is completed using to program dial scroll to the required program. (Spin) The required lamp will light up for identification. 16 H ow to use washer Water Temp. • By turning the Program Dial, the water temperature can be selected. -Cold - 30°C f 40°C 160°C 195°C Child Lock If you choose to lock the buttons on the control assembly to prevent tampering this function may be selected. 1. Child Lock • Child Lock can be set by pressing the Rinse+ button and Pre Wash button simultaneously. (About three seconds) 1. Water Temperature • Water temperature can be selected according to the program. The required temperature lamp will light up for identification. For the more detailed information, please refer to the pagel3. • When child lock is set, all buttons are inoperable except power button. • To deactivate Child Lock system, press Rinse+ and Pre Wash button simultaneously again. (About three seconds) • To change to the desired program, whilst in child lock mode. 1. Press both Rinse+ and Pre Wash together once again. (About three seconds) 2. Press the Start/Pause button. 3. Select the desired program and press the Start/Pause button again. The child lock can be set at any time and it is automatically canceled when operational errors occur. Also Child Lock works when power is off. ~ 7 H ow to use washer Time Delay 1. Time Delay Preparing washing before starting “Time Delay” - Turn on the water tap. - Load laundry and close the door. - Place the detergent and fabric softener in the drawer. • How to set “Time Delay” - Press Power button. - Turn the Program dial to select the program you require. - Press Time Delay button and set the desired time. - Press the Start/Pause button. (“:” blinks.) • If Time Delay button is pressed, “3:00” is displayed. The maximum delayed time is 19:00 hours and the minimum time is 3:00 hours. • Each pressing of the button advances on time delay by one hour. • To cancel the time delay, press the Power ((!)) button. • Time Delay is ‘expected time’ from the present to the completion of washing cycle or selected process (Wash, Rinse, Spin). • According to the condition of water supply and temperature, the delayed time and the actual washing time may vary. Program • 9 programs are available according to the laundry type. • Lamp will light up to indicate selected program. 1. Program •When Start/Pause button is pressed, the Cotton program is automatically selected. - By turning the Program dial, the program is selected in order of “ "Cotton - Eco -Delicate - Quick 30 - Rinse+Spin - Spin -Hand Wash/Wool - Synthetic - Baby Care".”. Regarding to the laundry type for each program Please refer to the pagel3. 2. Course - Cotton - Baby Care ■Eco - Synthetic - Delicate - Hand Wash/Wool ■ Quick 30 - QSpin - j#Rinse+Spin 18 H ow to use washer Start/Pause ►II 1. Start • This Start/Pause button is used to start wash cycle or pause the wash cycle. 2. Pause • If temporary stop of wash cycle is needed, press the Start/Pause button. • When in Pause, the power is turned off automatically after 4 minutes. • NB. The door will not open before 1 to 2 minutes when Pause is selected, or at the end of the wash cycle. Door Lock Lights whenever the door of the washer is locked. The door can be unlocked by pressing the Start/Pause button to stop the washer. The door can be opened after a short delay. Power (!) 1. Power • Press the Power button to turn power on and off • To cancel the Time Delay function, if the power button should be pressed. 2. Initial Program • When the Power button is pressed, the washer is...