Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The door will not open before 1 to 2 minutes when Pause is selected, or at the end of the wash cycle. Door Lock 1. Medic Rinse • For high effectiveness or more purity in rinse operation you can choose Medic Rinse option. 2. Pre Wash • If the laundry is heavily soiled, “Pre Wash” course is effective. • Lights whenever the door of the washer is locked. • The door can be unlocked by pressing the Start/Pause button to stop the washer. • The door can be opened after a short delay. Detecting 3. Intensive • If the laundry is heavily soiled “Intensive” option is effective. • By selecting the Intensive option, the wash time may be extended, depending on the program selected. 4. Crease Care • If you want to prevent crease, select this button with spin speed. The required lamp will light up for identification. • While the "Detecting" is shown in the display the machine rotates slowly and detects how many laundries are loaded in the drum. It will take a few seconds. • Available in Cotton and Synthetic. 18 H ow to use washer Child Lock If you choose to lock the buttons on the control assembly to prevent tampering this function may be selected. • Child Lock can be set by pressing the Medic Rinse button and Pre Wash button simultaneously. (About three seconds) • To change to the desired program, whilst in child lock mode. 1. Press both Medic Rinse and Pre Wash together once again. (About three seconds) 2. Press the Start/Pause button. 3. Select the desired program and press the Start/Pause button again. • To deactivate Child Lock system, press Medic Rinse and Pre Wash buttons simultaneously again. (About three seconds) • The child lock can be set at any time and it can be deactivated only by using child lock cancel process. Turning the power off and operational errors will not affect child lock. 19 English ow to use washer Spin O 1000 O 1200 O 1400 O 800 O 800 O 800 O 400 O 400 O 400 O No Spin O No Spin O No Spin O Rinse Hold O Rinse Hold O Rinse Hold o o o Spin Spin Spin [F1092Q/TD(W)(1 ~9)] [F1292Q/TD(W)(1~9)] [F1492Q/TD(W)(1 ~9)] • After selecting the spin course, the spin speed can be chosen by pressing the spin button. 1. Spin selection • Spin Speed is available according to the program as follows. [F1492Q/TD(W)(1~9)] - Cotton, Rinse+Spin, Quick 30, Bio Care, Bulky Rinse Hold - No Spin - 400 - 800 - 1400 - Delicate, Blanket, Baby Care, White, Cotton Quick, Synthetic, Hand Wash/Wool Rinse Hold - No Spin - 400 - 800 -Spin No Spin-400-800- 1400 [F1092Q/TD(W)(1 ~9)] - Cotton, Rinse+Spin, Quick 30, Bio Care, Bulky Rinse Hold - No Spin - 400 - 800 -1000 - Delicate, Blanket, Baby Care, White, Cotton Quick, Synthetic, Hand Wash/Wool Rinse Hold - No Spin - 400 - 800 -Spin No Spin - 400 - 800 -1000 [F1292Q/TD(W)(1 ~9)] - Cotton, Rinse+Spin, Quick 30, Bio Care, Bulky Rinse Hold - No Spin - 400 - 800 -1200 - Delicate, Blanket, Baby Care, White, Cotton Quick, Synthetic, Hand Wash/Wool Rinse Hold - No Spin - 400 - 800 -Spin No Spin - 400 - 800 -1200 2. No spin • If No spin is selected, the washer stops after draining water. 3. Rinse Hold • Rinse Hold is selected by pressing the spin button repeatedly this function leaves clothes in the machine; suspended in the water after a rinse without entering into spin. • To proceed through to a drain or spin, once the rinse hold function is completed using to Program dial and Spin button to the required program. (Sp in) The required lamp will light up for identification. 20 ow to use washer Water Temp. • By pressing the Temp. button, the water temperature can be selected. - Cold - 30°C 140°C 160°C 195°C • Water temperature can be selected according to the program. The required temperature lamp will light up for identification. For the more detailed information, please refer to the pagel4. O 95'C O 60 O 40 O 30 O Cold Temp. Time Delay e Preparing washing before starting “Time Delay” - Turn on the water tap. - Load laundry and close the door. - Place the detergent and fabric softener in the drawer. • How to set “Time Delay” - Press Power button. - Turn the Program dial to select the program you require. - Press Time Delay button and set the desired time. - Press the Start/Pause button. blinks.) • If Time Delay button is pressed, “3:00” is displayed. The maximum delayed time is 19 hours and the minimum time is 3 hours. • Each pressing of the button advances on time delay by one hour. •To cancel the time delay, press the Power button. • Time Delay is ‘expected time’ from the present to the completion of washing cycle or selected process (Wash, Rinse, Spin). • According to the condition of water supply and temperature, the delayed time and the actual washing time may vary. 3:00 5:00 21 English ow to use washer Display 1. Special function display • When child lock is selected, the “ l l 's displayed. • When time delay is selected, it shows the remaining time to finish the...