Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
It may cause fire. > Be sure to earth the washer to prevent the risk of electric shock, do not install electric shock. To reduce the washer in humid spaces. A Connecting the drain hose For Non-Pump Model • Be sure to reroute the hose so that it is not kinked; kinks or sharp bending in the hose will prevent proper drainage. • Make sure water is draineded smoothly by placing a base under the machine or by applying other appropriate mean. For Pump Model • L <= 1 m. _|__ •For Pump Model Only* — DRAIN HOSE Ç ) c p (4) C c ) Qwash) iS^S ¡u: W ö @U> 1. Water Supply Inlet Conned here with the inlet hose from the water faucet to feed water to the tub. 2. Water Selector Select "WASH' to supply water for washing and rinsing and "SPIN" for spin shower rinse. 3. Wash Timer Select the desired time for washing or rinsing. 4. Wash Program Set the program to ''Gentle'V'Normal", "Strong' according to kinds and quantity of the laundry. ........—- *Fof Pump Modal Only* 5. Drain Selector • For Non-Pump Model Select "Wash • Rinse' for washing and rinsing and11 Drain' to drain the water out of the tub. • For Pump Model Select "Wash • Rinse' for washing.rinsing and turn off the drain pump and "Drain" to drain the water out of Cabinet, and "Off' to turn off the drain pump. 6. Spin Timer Connect here with the inlet hose from the water faucet to feed water to the tub. 2 3 INSTALLATION INSTALLATION & HOW TO WASH ■ Maintain more than 10 cm between the side of drain hose and the wall. ■ A carpet must not obstruct the ventilation openings. Installation area ■ Set on flat and firm floor • Incorect installation may course severe noise and break down. Connecting the earth wire Install the earth wire to prevent short-circuit due to leaking current and electric shock. It is attached at the back of the washer. Qas • Connect it to the metal water pipe. •" ■ If the water pipe is made of plastic, it does not have the earth effect. Do not connect the earth wire to the gas pipe, lightning arrester, telephone connecter, etc. 5K Warning-the appliance with two-pronged plug must be grounded. donnecting the power plug • Insert the power plug into the outlet. • Before connecting the power plug, check if the voltage setting of the washer matches the out let voltage. If AC outlet with ground terminal is used, grounding is not needed. If not, never forget earthing (Refer earthing method above). The appliance must be positioned so that the plug is accessible. Vbltage Change (only for dual voltage) • This washer is assembled for 220V, but can be changed from 220V to 110V(or 127V). • Check your electrical source and follow the diagram below to convert voltage. Other earthing method 1 After connecting the earth wire to the earth copper plate, bury it at least 75cm deep under the wet ground. 1 Connect to the earthing-only outlet. > When installing it in an area where earthing is not possible, purchase a short-circuit breaker connect it to the ...
Эта инструкция также подходит к моделям:Стиральные машины - WP-610RP (5.43 mb)
Стиральные машины - WP-611RP (5.43 mb)
Стиральные машины - WP-621RP (5.43 mb)