Оценок - 3, средний балл: 3.3
(
)
)
|
Фото и характеристики LG WP-610N |
Фрагмент инструкции
(Wx D x H) Weight For Non-Pump Model 19 kg For Pump Model 20.5 kg How to read the manufactured month and year from the label stuck on the back of the product. EX) 9 0 1 T W A A 0 0 0 0 1 1-Serial No. - Password code — Product code Month - Year (The last digit to year) Main service part list : Refer to below listed part name when you need service call. Part name - WASH MOTOR - SPIN MOTOR - S.D.BASKET - CYCLE TIMER ASSEMBLY - CAPACITOR - GEAR CASE ASSEMBLY Remark 90 W (Output) 25-40 W (Output) PLASTIC WASHING MACHINE Please read this manual carefully before operating your washing machine and retain it for future reference. WP-600N(P)/WP-601N(P) WP-605N(P)/WP-610(NfR)(P) WP-620N(P)/WP-650N(P) WP-700N(P)/WP-701N(P) P204N P/No. : 3828EY3038A P/No. : 3828EY3038A Specification (R,N) : Pulsator Type (P) : Pump Model Only CAUTION FEATURES A CAUTION Installation Area •Avoid area exposed to snow, rain, or where humidity is high. It may cause ° ° ^ electric shock. Switch Area •Avoid watering on the switch area. It may cause electric shock or fire. Volatile Material • Do not use volatile material such as Benzene, Gasoline, bug killer. • Do not leave strong alkaline substance such as bleach inside the tub. Damage on plastic surface and | rubber parts may occur. Installation • Install the washing machine on a horizontal support. Otherwise, ^ it may cause vibration and noise. • Be sure to disconnect the power cord from the electric outlet before starting care and maintenance. Heat •Avoid electric heater, candle light, cigarette light, bug smoker, etc. near the machine. It may ignite or deform i qqT plastic part. Hot water • Avoid using hot water ^ over 60 °C. It may deform plastic parts or cause malfunction. In Operation • Do not insert the hand inside the spin dryer basket while the machine is in operation (Do not let children climb on the machine or climb into the tub. Injury may occur.) • Do not drain the water out of the wash tub while the spin dryer basket is in operation.Otherwise the spin motor could be damaged. Power Cord • If the power supply cord is damaged, it must only be replaced by the manufacture or its service agent or a similarly qualified person in order to avoid a hazard. Electric Outlet • Avoid connecting several electric devices to single outlet. It may cause fire. > Be sure to earth the washer to prevent electric shock. To reduce the risk of electric shock, do not install the washer in humid spaces. A 1. Water Supply Inlet Connect here with the inlet hose from the water faucet to feed water to the tub. 2. Water Selector Select "WASH" to supply water for washing and rinsing and "SPIN" for spin shower rinse. 3. Wash Timer Select the desired time for washing or rinsing. 4. Wash Program Set the program to "Gentle","Normal", "Strong" according to kinds and quantity of the laundry. 5. Drain Selector • For Non-Pump Model Select "Wash • Rinse" for washing and rinsing and "Drain" to drain the water out of the tub. * For Pump Model Select "Wash • Rinse" for washing,rinsing and turn off the drain pump and "Drain" to drain the water out of Cabinet, and "Off" to turn off the drain pump. 6. Spin Timer Connect here with the inlet hose from the water faucet to feed water to the tub. **After continue using spinning program 3 times continue , Please stop spinning more than 1 hour otherwise the spin motor could be damage of fire or stop operation. ***To obtain an efficient perfomance according to energy label according to energy label, Wash program 30 mins (60 °C), Rinse 2 times, Spin 1 times should be applied. 2 3 INSTALLATION INSTALLATION & HOW TO WASH Installation area • Set on flat and firm floor • Incorect installation may course severe noise and break down. ■ Maintain more than 10 cm between the side of drain hose and the wall. ■ A carpet must not obstruct the ventilation openings. Connecting the earth wire • install the earth wire to prevent short-circuit due to leaking current and electric shock. • It is attached at the back of the washer. • Connect it to the metal water pipe. If the water pipe is made of plastic, it does not have the earth effect. • Do not connect the earth wire to the gas pipe, lightning arrester, telephone connecter, etc. 3S( Warning-the appliance with two-pronged plug must be grounded. donnecting the power plug • Insert the power plug into the outlet. • Before connecting the power plug, check if the voltage setting of the washer matches the out let voltage. • If AC outlet with ground terminal is used, grounding is not needed. If not, never forget earthing (Refer earthing method above). • The appliance must be positioned so that the plug is accessible. Voltage Change (only for dual voltage) • This washer is assembled for 220V, but can be changed from 220V to 110V(or 127V). • Check your electrical source and follow the diagram below to convert voltage. Other earthing method • After c...
Эта инструкция также подходит к моделям:Стиральные машины - WP-610NP (5.85 mb)