Войти:
Оценок - 1, средний балл: 5 ( )

Инструкция по эксплуатации LG, модель WD-10480NV

Производитель: LG
Размер: 1.7 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Be careful of electric shock or disconnecting the parts while troubleshooting. 2. First of all, check the connection of each part terminal with wiring diagram. 3. If you replace the PWB assembly (Main), put in the connectors correctly. CAUTION NO NO YES YES YES NO NO YES PWB ASSEMBLY 1 2 Check the fuse Check the harness Assembly. When measuring the voltage of the outlet, is the voltage AC 220-240V? When measuring the voltage of pin ., . of the PWB assy, is the voltage AC 220- 240V? Replace PWB assembly. NO POWER Cancle the Child-Lock by pressing [Temp.] and [Option] Buttons simultaneously for 3 seconds. Normal Does the Child-Lock is set? First, unplug the power cord and plug again. Check the buttons are working. Visit to check ALL BUTTONS ARE LOCKED EXCEPTOR FOR POWER BUTTON NO YES NO YES NO YES NO NO YES YES YES NO NO NO YES Wiring diagram option (HOT) option (HOT) MAIN WASH : Detergent WASH PRE W MAIN SOFTENER ASH max Is the water supply shut-off? Is the tap opened? Is the inlet valve filter clogged with impurity? Is resistance of the inlet valve connector between the 2 to 8 k.? Check the voltage between each terminals of inlet Valve is 220 - 240V~. (Refer to 7-2 TEST MODE) Is water supplied? Are receptacles correctly connected to the terminals of inlet valve? Is detergent put in the correct compartment of the drawer? Is the detergent caked or hardened? Open the tap. Clean the filter. Replace the inlet valve. Replace PWB assembly Refer to solution NO INLET Check the wiring on the dispenser. Put the detergent in the correct position PRE+MAIN Clean the drawer. NO WATER SUPPLY DETERGENT DOES NOT FLOW IN NO YES NO YES NO YES NO NO YES YES YES NO NO NO YES Wiring diagram option (HOT) option (HOT) MAIN WASH : Detergent WASH PRE W MAIN SOFTENER ASH max Is the water supply shut-off? Is the tap opened? Is the inlet valve filter clogged with impurity? Is resistance of the inlet valve connector between the 2 to 8 k.? Check the voltage between each terminals of inlet Valve is 220 - 240V~. (Refer to 7-2 TEST MODE) Is water supplied? Are receptacles correctly connected to the terminals of inlet valve? Is detergent put in the correct compartment of the drawer? Is the detergent caked or hardened? Open the tap. Clean the filter. Replace the inlet valve. Replace PWB assembly Refer to solution NO INLET Check the wiring on the dispenser. Put the detergent in the correct position PRE+MAIN Clean the drawer. NO WATER SUPPLY DETERGENT DOES NOT FLOW IN YES YES YES NO NO NO NO NO YES YES YES YES Wiring diagram option (HOT) MAXmax ABNORMAL SOUND SOFTENER DOES NOT FLOW IN Fix the bolt tightly. Replace the V-belt (4400FR3116B) Replace the motor. Refer to NO WATER SUPPLY Check the wiring on the dispenser. Put it in the correct compartment. Clean the cap and drawer. Is the pulley bolt loosened? Is the belt worn? Is there friction noise from the motor? Is water supplied? Are receptacles correctly connected to the terminals of inlet valve? Is softener put in the correct compar...

Эта инструкция также подходит к моделям:
Стиральные машины - WD-10480N (1.7 mb)
Стиральные машины - WD-10480S (1.7 mb)
Стиральные машины - WD-10481N (1.7 mb)
Стиральные машины - WD-10481S (1.7 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории