Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
By activating F1 during low spin, this low spin will be extended to15 minutes unless the START button (S) is pressed earlier. If the 15 minutes of low spin have been completed, the high spin isautomatically canceled. By activating F1 after the preprogrammed low spin, you will have a maximum of 14 minutes of high spin unless the START button (S) is pressed earlier. Adjustable stop time : Here you can program a certain stop time. The display shows the countdown of this extra time. When this time is expired, the function will appear automatically and the program will continue. Select F1 (see above). The stop time can be programmed by means of the ECO button (E). By pressing it once, the stop time is programmed for 10 minutes. From now onwards, “F1” and “10” appear by turns on the middle display. By pressing the ECO button (E) once more, you add each time 10 minutes. After 50 minutes, 1.0, 1.1, 1.2, etc... appear with a maximum of 4.0 hours. By means of the START button (S), you can each time reduce 10 minutes. Remark : The programmed stop time is executed after the decimal point in the right display has extinguished. The stop time cannot be programmed during spin. Function F2 (soak) This function can only be chosen during prewash, main wash and first rinse. The cycle time is stopped. The bath is filled till high water level and heated up to 40 °C (if a higher temperature was programmed, this will be followed). As long as this temperature is not reached, the machine makes a reduced wash action ( shorter action time and longer pause time). When the bath has reached its temperature, the drum will make one left/right rotation every4 minutes. Should the temperature fall, the water will be heated again, during which the action will be reduced again. This function remains active until the START button (S) is pressed again. Programmable soak time : In the same way as for the stop time, you can program the soak time (see programmable stop time). 13 Function F3 (reduced wash action): By selecting F3, the wash action time and pause time will be reversed; unless the wash action time was programmed to be shorter than the pause time. Example: 12 sec. action/3 sec. pause becomes: 3 sec. action/12 sec. pause 6 sec. action/9 sec. pause remains: 6 sec. action/9 sec. pause This function does not influence the cycle time - the program continues normally -and remains active until the START-button (S) is pressed. Function F4 (execute high spin as low spin): By activating this function, high spin will be automatically replaced by low spin. This function does not influence the cycle time - the program continues normally -and remains active until the START-button (S) is pressed. Function F5 (rapid advance): This function is mostly used by technicians and maintenance staff. It allows to the program. By pressing and releasing the ECO-button (E), the programs skips to the next segment. Attention! If F5 is activated during final spin, this segment of the program will be skipped as described above. It is however followed by a coast and tumble time to disentangle the linen. This special function prevents the user from opening the machine while the drum is still rotating and represents an important safety feature. To return to normal operation, press the START-button (S). Function F6 (no spin): This function eliminates all spin action. Intermediate spin is replaced by a regular wash action. During final spin, only the programmed low spin time will be completed as regular wash action. High spin is skipped in its entirety. This function influences the cycle time - the program continues normally - and remains active until the START-button (S) is pressed. Function F7 (indication of the rpm) By using F7 the number of revolutions of the drum (rpm) appears on the right display. Function F8 ( changing the number of revolutions (rpm) at final spin) By means of F8, the number of revolutions can be changed at high spin. The programmed number of revolutions appears on the left display. Each time you press the ECO button (E), the spin decreases with 25 rpm ( min.500). Each time you press the START button (S), the spin increases with 25 rpm (max. 999). Remark : This function has to be selected before final spin has started. 14 End of a program At the end of a program, while the door is being released, the left display shows End; and the Start-LED is switched off. After that only the right display will continue to show the program number. This is the end of the program. Premature ending of the program By pressing the START-button (S) during the program, the Start-LED is switched off and the water is drained from the machine. As long as the water has not reached the safety level, the door will remain sealed and the display will show “SLE” (Safety Level) on the left display. Afterwards the display will temporarily show “End” on the same display and the Start-LED will be switched off. After that only the right display will continue to show the program number....
Эта инструкция также подходит к моделям:Стиральные машины - HF 234 (1 mb)