Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
• Press and hold the START / PAUSE / CANCEL button for 3 seconds. • Water will drain from the machine. The progress display will move to Spin • The door may be opened after the DOOR OPEN light glows. Page 9 Wash programme guide Wash programme guide Programme Cotton 90 Cotton 60 Cotton 40 Intensive 60 Synthetics 60 Synthetics 40 Synthetics Cold Curtain 40 Delicate 40 Woolen 40 Woolen Cold Handwash 30 Mini 30 Rinse Spin Drain Fabric type Heavily soiled fabrics made from cotton or linen, heat resistant. Normally soiled fabrics made from cotton or linen, heat resistant. Lighly soiled fabrics made from cotton or linen, non - colour fast. Heavily soiled fabrics made from cotton or linen, Normally soiled fabrics made from cotton / synthetics blended, heat resistant. Lightly soiled , easy care fabricsmade from cotton, synthetics, blended, non - colourfast. Very lightly soiled, easy care fabrics made from cotton, synthetics, blended, non - colourfast. Special programme forcurtains. Sensitive, easy care fabrics made from cotton synthetics or blended fabrics. Hand wash marked, easy care, blended fabrics. Hand wash marked, wool and easy care, blended fabrics. Special programme forhand wash marked wool and silk. Lightly soiled smaller load. Rinsing. Spinning. Draining. Programmedescription Pre-wash / 3 Rinses / 3 Intermediate spins / Final spin. 3 Rinses / 2 intermediate spins / Final spin in cotton profile. Final spin in cotton profile. Drain 7 7 --- Max load(kg) 139 140 2 55 49 --- 2.26 1.19 --- 2.5kg l + ll ll --- Duration(min) Water consumption (litre) Energy consumption (kwh) Pre- WashQuick washRinse plusRinse HoldAnti creasingCapacityDetergentdispenser heat resistant. Main wash / 3 Rinses / 3 Intermediate spins / Final spin. Main wash / 3 Rinses / 3 Intermediate spins / Final spin. Main wash / 4 Rinses / 4 Intermediate spins / Final spin. Main wash / 3 Rinses / 3 Intermediate spins / Final spin. Main wash / 3 Rinses / 3 Intermediate spins / Final spin. Main wash / 3 Rinses / 3 Intermediate spins / Final spin. Pre-wash / Main wash / Special final spin profile for anti - creasing Main wash / 3 Rinses / No intermediate spins / Final spin. Main wash / 3 Rinses / 1 intermediate spin / Final spin. Main wash / 3 Rinses / 1 intermediate spin / Final spin. Main wash / 2 Rinses / No intermediate spin / Final spin. Main wash / 2 Rinses / Final spin. 2.5kg 7 142 49 0.50 ll 2.5kg 7 175 70 1.35 ll 2.5kg 3 103 50 1.02 ll 1.5kg 3 100 50 0.50 ll 1.5kg 3 85 50 0.21 ll 1.5kg 2 115 65 0.55 l + ll 2.0kg 2 62 60 0.35 ll 2.0kg 1.5 55 50 0.35 ll 1.5 48 50 0.04 ll 1 40 40 0.15 ll 2.5 30 50 0.15 ll 7 23 15 0.12 --- 7 19 ---0.1 --- Depending on water, textile and ambient conditions, the values given may deviate from the standards as tested in laboratory conditions. Page 10 Care and maintenance Care and maintenance Detergent Dispenser To remove residual detergent, pull the dispenser drawer outward, press on the marked area of the siphon, and pull the drawer free. Wash the dispenser and the housing in water before re-inserting the dispenser. Siphon To prevent clogging, the siphon ( the coloured component in the dispenser ) should be cleaned after every 30—40 washes. Grasp the edges and pull the siphon free. Clean away any residual softener and carefully re-fit the siphon. lll Cleaning the pump filter • A filter prevents foreign objects from entering and damaging the pump. This filter should be cleaned after every 3040 washes. • First disconnect the machine from the power supply. • Press on the marked area of the filter cover to open it. • Remove the small coloured plug from the drain hose and empty the drain water into a suitable receptacle placed on the floor below the hose. When all the drain water has discharged, replace the plug. • Unscrew and remove the filter. Some residual water may leak onto the filter cover. • Remove any debris and clean the filter before replacing it • Mop up any spillage and close the filter cover. General Cleaning On no account use benzene or other solvents to clean the cabinet, door or rubber of the machine. A damp cloth will normally suffice. If desired, a good wax polish may be used on the painted parts of the cabinet. Page 11 Care and maintenance Care and maintenance The water intake filter • Water intake filters are located at the machine inlet valve and at the tap end of the inlet hose. These filters prevent dirt from entering the machine and should be cleaned periodically. (every 30 to 40 washes.) • Close the tap and disconnect the inlet hose. • Clean the filters with a bristle brush . • If the filter is very dirty it may have to be pried loose with a pair of pliers. Hoses • Periodically inspect the hoses for cracks or deterioration. • Worn hoses should be replaced and are available from the nearest Defy Service Centre. Owner’s responsibility Since the following are not factory faults, they are the owner’s responsibility. • Damage to exterior finish. • Breakage of glass and other components.. • Damage throu...
Эта инструкция также подходит к моделям:Стиральные машины - MAXIMAID 720M (2.01 mb)