Войти:
Оценок - 5, средний балл: 4 ( )

Инструкция по эксплуатации Daewoo, модель DWD-F1211

Производитель: Daewoo
Размер: 968.95 kb
Название файла: 78934419-6984-495d-9897-91c47611358f.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


4 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’ and ‘30’ °C washing temperatures are selectable with Hand Wash program. • ‘1000’ rpm of spin velocity is NOT selectable with Hand program. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Hand Wash program. • Use Hand Wash program for the laundry that is marked ‘Hand wash’ in the care label. 17 * QUICK 30 1 Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. 2 Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 3 Select the ‘Quick’ program using program selection dial. • The LED shows ‘1:16’ and all Program Lights turn on. • Washing temperature ‘30’ °C, spin ‘800’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the washing temperature, spin velocity or add wash options (Rince+, Crease Care), press each button. 4 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’, ‘30’ °C and ‘40’ °C washing temperatures are selectable with Quick 30 program. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Quick 30 program. 18 MAINTENANCE Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Cleaning your washer Exterior Interior Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep its looking like new one. Clean interior with 250ml of chlorine bleach mixed with 500ml of detergent. Run washer through a complete cycle. Repeat this process if necessary. Do not put sharp or metal object in your washer, or they can damage the finish. Check all pockets for pins, clips, money, bolts, nuts, etc. Do not lay these objects in your washer after emptying pockets. Winter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If you store or move your washer during freezing weather, winterize it. To winterize washer To use washer again • Turn off water faucet. • Disconnect and drain water inlet hoses. • Run washer on a drain and spin setting (see page 10) for 1 minute. • Unplug the power supply cord. • Flush water pipes and hoses. • Reconnect water inlet hoses. • Turn on water faucet. • Reconnect power supply cord. Non-use or vacation care Operate your washer only when you are at home. If you are on vacation or don’t use your washer for an extended period of time, you should: • Unplug the power supply cord or turn off eletrical power to the washer. • Turn off the water supplier to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away. 19 HOW TO CLEAN THE FILTER Cleaning the water inlet filter • Clean the filter when water leaks from the water inlet. 1 Pull the power 2 Turn off the water 3 Pull the inlet filter 4 Remove the dirt plug out before supply to the out. from the inlet filter cleaning it. washer and with a brush. separate the inlet hose. Cleaning the drain filter • This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc.. • If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be caused. CAUTION : Be careful when draining if the water is hot. 1. Open the lower cover(1) by using a coin. Remove the cap hose(2) to pull out the hose. 2. Unplug the cap hose(2), allowing the water to flow out. At this time use a vessel to prevent water flowing on to the floor. When water does not flow any more, turn the pump filter(3) open to the left. 3. Remove any foreign material from the pump filter(3). After cleaning, turn the pump filter clockwise and insert the cap hose(2) to the original place. Close the lower cover. 1 100 2 3 2 3 Cleaning the detergent case *After a while detergent and fabric softeners leave a deposit in the case; - It should be cleaned from time to time with a jet of running water. -If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out. - To facilitate cleaning, the upper part of the fabric softener compartment can be removed. *Detergent can also ...

Эта инструкция также подходит к моделям:
Стиральные машины - DWD-F1013'S (968.95 kb)
Стиральные машины - DWD-F1012 (968.95 kb)
Стиральные машины - DWD-F1212 (968.95 kb)
Стиральные машины - DWD-F1213'S (968.95 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории