Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
2.5kg of dry washing (cottons). 2)Only if a filling quantity of 1kg is observed are creases in the washing largely avoided. 5 to 7 easy-care men's shirts are equivalent to about 1kg of dry washing. Instructions for use Separate Conditioning/Starching/Impregnating Type of Washing Max. Filling Quantity (dry weight) Program Selector Cottons/Linen 5kg STARCHING (AMIDON.) Separate Spin Type of Washing Max. Filling Quantity (dry weight) Program Selector Cottons/Linen 5kg SPIN (ESSORAGE) Easy-Cares 2.5kg Delicates 2.5kg SHORT SPINWoollens/Handwash 2kg (ESSORAGE DELICAT) Silk/Handwash 1kg Instructions for use Cleaning and Care Control Panel Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents. 0 Wipe off control panels with a damp cloth. Use warm water to do this. Washing Detergent Drawer The washing detergent drawer should be cleaned from time to time. 0 1. Pull out the washing detergent drawer as far as it will go. 2. Remove the washing detergent drawer with a firm pull. 3. Remove the softener insert from the middle compartment. 4. Clean the softener insert under running water. 5. Clean the compartments from the rear with warm water. It is best to use a bottle brush. 6. Push on the softener insert as far as it will go so that it is secure. Instructions for use 7. Use a brush to clean the entire rinsing-in part of the washing machine, especially the nozzles on the top side of the rinsing-in chamber. 8. Insert the washing detergent drawer into the guide rails and push it in. Washing Drum The washing drum is made of high-quality stainless steel. Rust deposits on the drum can occur due to foreign bodies in the washing which can cause rust. Attention! Do not clean the stainless steel drum with acidic antiliming agents, scouring agents containing chlorine or iron or steel wool. Our Customer Service Department has suitable agents available. 0 Remove any rust deposits on the drum using a stainless steel cleaning agent. Filling Door 0 Check regularly whether there are deposits or foreign bodies in the rubber sleeve behind the filling door and, if so, remove them. Instructions for use Cleaning the drain pump Paper clips, nails and so on can sometimes get into the washing machine with the washing and remain in the drain pump casing. Fluff and strands of fabric can gather on these items and block the drain pump. Therefore the drain pump should be cleaned at least once a year. 1 Warning! Switch off the washing machine and pull out the mains plug before cleaning the drain pump! 0 1. First carry out an emergency emptying (see section ”Carry Out Emergency Emptying”). 2. Place a towel on the floor in front of the cover of the solution pump. Residual water can run out. 3. Unscrew the drain pump cover anti- clockwise and pull it out. 4. Remove any foregin bodies from the pump housing. 5. Replace the cover. Insert the webs on the cover laterally into the guide slots and screw the cover firmly into place clockwise. 6. Close the emergency emptying hose and place it in the holder. 7. Close the flap. Instructions for use What to do if ... Remedying Faults In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even during the warranty period. • It the fault code C1 or C2 appears in the multi-display, you may be able to remedy the fault yourself (see the fault table below). After remedying the fault, press the button START/PAUSE (MARCHE/PAUSE). If the fault code is displayed again, please inform the Customer Service. • In the case of all other displayed faults (C and number or letter), please inform the Customer Service and state the fault code. Problem Possible Cause Remedy The mains plug is not Plug in the mains plug. plugged in. The fuse of the building's Replace the fuse. wiring is not in order. The washing machine The filling door is not Close the filling door; The does not work. correctly closed. lock must engage audibly. The START/PAUSE Press the START/PAUSE (MARCHE/PAUSE) button (MARCHE/PAUSE) button was not pressed long until the program starts. enough. The filling door cannot be closed. The child safety feature is set. Cancel the child safety feature (see Section "Child Safety Feature“). Water valve closed. Open the water valve. Close the water valve. Water is not running. Filter in screw connection of Unscrew the hose from the Error code (1 the intake hose blocked. tap, remove the sieve and appears. clean under running water. Water valve. is blocked with Check water valve. and have limescale or is faulty. it repaired if necessary. Instructions for use Problem Possible Cause Remedy The washing machine vibrates during operation or it is on an uneven surface. Remove transport packaging The transport packaging has according to the installation not been r...