Войти:
Оценок - 3, средний балл: 4.7 ( )

Инструкция по эксплуатации ALFA, модель 40-MS

Производитель: ALFA
Размер: 445.65 kb
Название файла: 5e3b5303-c384-4655-8ce4-6d767d209d14.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-Shooting *Answer to question Packing list *Specification 1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user. Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. Please check if the power receptacle has good earthing condition before using to guarantee your safety. Names of the parts Base frame Outer cover of the spin tub Inner cover of the spin tub Spin timer Spin tub frame Spin tub Cabinet Water-filling entrance Wash selector Wash timer Control panel Lint filter(Installed by user) Pulsator Wash tub Wash tub cover Overflow filter Valve cover 2 Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle. If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean. Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel. Do not use water hotter than 50 C . In case the washing machine is installed on ground with carpet , do not block the ventilation hole with carpet. Ventilation hole at the bottom of the washing machine Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more. 3 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children without care shall not use the machine. Keep the machine away from direct sunlight and heat source like the heater. Do not wash laundries with volatile materials (such as thinner, petrol etc.). Petrol Thinner To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign materials before washing. Please check if the water faucet is open, and if the connection of the water inlet pipe is proper. It is suggested to use foamless washing powder. Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Overflow filter Lint filter After opening the package,please take out the lint filter from the document bag,install it to the overflow filter of the wash tub.See to the figure. The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 1.2m , or the drainage will not be smooth enough and cause incomplete drainage. 2.Do not step on or press the drain hose. <1.2m 4 5 How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2). Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading for the side of the spin tub. (See to Figure 3). Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp. Figure 1 Figure 2 Figure 3 Figure 4 Embed into the groove in turn Extend the drain hose from the side of spin tub Soft item Extend to the spin tub side Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drainhose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 4). Soft item Back Front Extend the drain hose from the rear side Install the water inlet hose; Select ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории