Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Remove the double back tape and firmly attach the stacking kit the top of the washer to assure the proper seal. Make sure the word FRONT printed on the stacking kit is facing forward as shown above. 3) Put back edge of stacking kit to back mold line of washer's top cover and tighten the screw. 6) Gently push the dryer into position as indicated in figure 5 & 6, sliding the unit into the slots provided. It is important that the dryer is level. Make sure all four leveling legs are pushed all the way back into the slots to ensure proper mounting. 4) Install all 7 screws provided with a power drill and tighten the stacking kit to the unit base securely. 7) Insert the plastic covers (removed in section 2) covering the two front slots of the leveling legs. Depending upon the location of the unit, it may be necessary to change the side on which the dryer door opens. DC68-01052A...
Эта инструкция также подходит к моделям:Стиральные машины - DC68-01052A (1.05 mb)