Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Refer to the INSTALLATION INSTRUCTIONS for details of proper washer installation. IMPORTANT: Prior to first wash, use an all purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of wash drum. 1. Get the clothes ready for washing. Empty pockets and cuffs. Sort items into separate loads. Pretreat stains and heavily soiled areas. TLW1991N IMPORTANT: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation. -9 802756 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT -10- 802756 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 2. Measure and add low sudsing, high efficiency (HE) detergent, fabric softener and bleach to the dispenser drawer. Refer to section on Using Your Dispenser Drawer. Follow instructions on detergent package for amount to use. NOTE: High efficiency (HE) detergents are designed especially for frontload washers to reduce oversudsing and maximize cleaning results. Look for the HE logo or “high efficiency” on the detergent’s label. IMPORTANT: If using non-HE detergent, avoid oversudsing by using only 1/2 of the detergent manufacturer's recommended amount. 3. Load clothes into wash drum. Refer to section on Load Sizes. NOTE: Small items such as baby socks may get caught around the door. Place these articles inside a mesh garment bag. When washing bulky items such as blankets and comforters, use the HANDWASH/DELICATE cycle. The cycle includes gentle agitation to clean items delicately and thoroughly. The extra rinse cycle may be selected to ensure complete removal of soap residue. A final spin extracts the moisture at a low speed to maintain the load’s balance and minimize wear to the articles. 4. Close the loading door tightly. The washer will not operate with the loading door open. 5. Set WASH/RINSE temperatures. FLW2169N FLW2169N FLW2170N FLW2170N FLW2177N FLW2171N To reduce the risk of serious injury, do not bypass the loading door switch by permitting the washer to tumble or spin with the loading door open. W095 WARNING There are four or five WASH/RINSE temperatures If items need to be added or removed after a cycle available – Boosted Hot Wash/Cold Rinse (select has started, turn the cycle selector knob to the models only), Hot Wash/Cold Rinse, Warm Wash/ OFF position. Wait until the DOOR light goes off Warm Rinse, Warm Wash/Cold Rinse, Cold Wash/ (approximately 45 seconds after cycle has been Cold Rinse. stopped), open door, add or remove items, and start the cycle again. The Energy Saver settings, marked with an asterisk (*) on some models, show which There is no agitator on this washer. Instead, the temperature settings will use the least energy. clothing gently tumbles through the water. The wash action consists of a period of tumbling in one Refer to the Water Temperature section for the direction, a brief pause, and then a reverse tumble temperature that works best for your garments. in the opposite direction. The pauses are part of WAR NING Window may be hot in the Boosted Hot and Hot wash cycles. W325 the tumble action and add to the unique cleaning capabilities of the washer. They are part of the cycle. NOTE: There will be extended pauses when Boosted Hot Wash, if available, is selected because the water is being heated. 6. Select EXTRA RINSE if desired. To Change Cycles If the selected cycle is not the correct cycle for the fabric being washed, you may change the cycle selection at any time until the first wash fill is complete. Once the washer has filled for the first part of the cycle (the wash portion), the current cycle must be aborted and a new cycle must be started. To change the cycle before the first fill is complete: TLW2078N The extra rinse control is useful for detergent Change the cycle selected on the cycle selector sensitive skin. By pressing the EXTRA RINSE to ON, knob. the REGULAR, PERMANENT PRESS, and HANDWASH/DELICATE cycles will each provide an additional rinse. If the rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected. 7. Select the cycle according to the type of fabric being washed. Use the indicator dot on the cycle selector knob as a guide. 8. Press and hold the START button for two seconds to start the washer. The DOOR light will come on after a short delay, water fill will begin, and wash drum will begin tumbling. NOTE: Washer door MUST be closed tightly to start washer. -11 802756 © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT selector switch to the OFF position. 2. Restart the cycle from the beginning. Refer to the To Wash Clothes section. To Pump Out Water After Aborting Cycle Run a SPIN ONLY cycle. This cycle will perform a high speed extract operation that will pump all of the water out of the washer. Manual Soaking To soak a clothes load, start a wash in the desired cycle. After fill is complete and wash drum has started tumbling, turn the cycle sel...