Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
a. Remove external duct and duct access covers, if present. b. Clean inside of duct with a vacuum. c. Clean dampers and make sure they operate freely. d. Replace duct and all access covers before returning operation. 2. Ensure even lint distribution over lint screen, replace if distribution of lint is uneven to maintain proper airflow and avoid overheating. 3. Carefully wipe any accumulated lint off the cabinet high limit thermostat and thermistor, including perforated cover. Lint buildup will act as an insulator, causing machine to overheat. 4. Clean lint and debris buildup from blower to maintain proper airflow, to avoid overheating and prevent possible vibration. Quarterly 1. Use a vacuum to clean air vents on drive motors. 2. Use a vacuum to clean lint from rear limit thermostat cover. 3. Check and clean steam coils, if applicable. 4. Check flow of combustion and ventilation air. 5. Check belt tension and condition. Replace worn or cracked belts. Bi-Annually 1. Check mounting hardware for any loose nuts, bolts or screws. 2. Check gas connections for leakage. 3. Check for loose electrical connections. 4. Check steam connections for looseness and leakage. 5. Remove all front panels and vacuum, including coin drop mechanisms. 6. Check cylinder and front panel seals. 7. Inspect cabinet and inner panels for any damage, replace or repair as needed. 8. Clean burner tubes of any lint buildup. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70400401 19 Maintenance To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the tumbler before servicing. • Close gas shut-off valve to gas tumbler before servicing. • Close steam valve to steam tumbler before servicing. • Never start the tumbler with any guards/panels removed. • Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded. W002 WARNING Daily Maintenance Inspect the area surrounding tumblers, remove all combustible materials, including lint, before operating the machine. Check cylinder for foreign objects to avoid damage to clothing and equipment. Clean lint from lint compartment and screen to maintain proper airflow and avoid overheating. Monthly Maintenance Remove lint and debris from inside exhaust duct to maintain proper airflow and avoid overheating. Ensure even lint distribution over lint screen, replace if distribution of lint is uneven to maintain proper airflow and avoid overheating. Carefully wipe any accumulated lint off the cabinet high limit thermostat and thermistor, including perforated cover. Lint buildup will act as an insulator, causing machine to overheat. Clean lint and debris buildup from blower to maintain proper airflow, to avoid overheating and prevent possible vibration. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance WARNING To reduce the risk of electric shock, fire, explosion, serious injury or death: • Disconnect electric power to the tumbler before servicing. • Close gas shut-off valve to gas tumbler before servicing. • Close steam valve to steam tumbler before servicing. • Never start the tumbler with any guards/panels removed. • Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded. W002 Quarterly Maintenance Use a vacuum to clean air vents on drive motors. Use a vacuum to clean lint from rear limit thermostat cover. Check and clean steam coils. Check flow of combustion and ventilation air. Check belt tension and condition. Replace worn or cracked belts. Bi-Annually Maintenance Check mounting hardware for any loose nuts, bolts or screws. Check gas connections for leakage. Check for loose electrical connections. Check steam connections for looseness and leakage. Remove all front panels and vacuum, including coin drop mechanisms. Check cylinder and front panel seals. Inspect cabinet and inner panels for any damage, replace or repair as needed. Clean burner tubes of any lint buildup. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70400401 21 Before You Call for Service Won’t Start Won’t Heat Clothes Not Dry Possible Reason – Corrective Actions • Insert correct coin(s) or valid card if applicable. • Close the loading door tightly. • Close lint panel tightly. • Press the PUSH TO START or START pad/button. • Be sure power cord is plugged all the way into the electrical outlet. • Drying timer is in OFF position. • Check the main fuse and circuit breaker. • Check fuses located in the machine. • Insufficient airflow. • Gas shut-off valve in OFF position. • Are controls properly set? • Broken drive belt. Call the service person. • • Tumbler is in Cool Down Mode. • • Lint screen clogged. Clean lint screen. • • Exhaust duct to outside is blocked. Clean out. Customer Service If literature or replacement parts are required, contact the source from whic...