Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Do not use if the power cord or appliance show any signs of damage. Unplug after every use or if defective. To avoid potential hazards, repairs such as replacing a damaged cord, must only be carried out by our customer service personnel. The power cord . must not touch hot parts; . must not be pulled over sharp edges; . must not be used as a carrying handle. The heating element will become hot. Hold the appliance only by its handle. Only use on dry hair; under no circumstances use the appliance on artificial hair. Place the appliance on heat-resistant surfaces only. Avoid any skin contact. Do not use near water contained in bath tubs, sinks or other containers. Risk of fatal injury! Never allow the appliance to come into contact with water. Even an appliance that has been switched off poses a danger; therefore unplug the appliance after every use or when interrupted in its use. Installing a ground fault circuit interrupter up to 30 mA in the house offers additional protection. Please consult an electrician. Risk of suffocation! Do not allow children to play with packaging material. PARTS AND OPERATING CONTROLS a. ON/OFF switch b.^/Ў buttons for temperature control c. LCD screen d.Housing e. Ceramic-coated heating plates f. Ionization hole g. Sliding button for locking CERAMIC COATING The heating plates have a ceramic coating. This produces a smooth, even surface. The advantages of this coating are: - It improves the sliding action across the hair. - The plates heat up much faster and stay at a constant temperature suitable for hairstyling. OPERATION Place the hair straightener on a flat, heat-resistant surface and plug it in. To switch the power, hold down the ON/OFF switch at least 2 seconds (Fig. 2). The standard temperature of the appliance is 130°C, “Ready” is flashing when the temperature is not ready. As soon as the set temperature is reached, “Ready” stops flashing (Fig. 3). You can now start straightening your hair. When you have finished straightening your hair, switch the appliance off by using the ON/OFF switch, unplug it and let the appliance to cool down before storing. SETTING THE TEMPERATURE By pressing ^ or Ў button you can change the standard temperature in 10°C steps from 130-230°C. The current temperature is indicated by the numeral on the LCD (Fig. 4). If the temperature falls momentarily during use, the appliance will heat back up again (“Ready” flashes). When pressing ^ button and hold it for 2 seconds, the present setting will be jumped to the highest setting (Fig. 5). NOTE: If you switch the appliance off and then on again, the temperature defaults to 130°C. STRAIGHTENING FUNCTION Heat treatment should only be applied to healthy hair. It is not recommended for weak hair or hair that has been recently bleached, as this may have weakened it. Use the hair straightener only on dry hair. Unlock both heating plates, set slide button (Fig. 1). Once the hair straightener has reached the set temperature, divide the hair into strands, select one strand of hair and place it between the plates. Hold the plates closed for a few seconds, floating plate can help the hair full contact with the plate, pulling downward from the roots to the tip, in a single even movement the strand of hair should be kept straight when doing this to prevent it from becoming wavy. It may be necessary to repeat this procedure two or three times on medium-length or long hair (Fig. 6). When somebody else is helping you with the straightening, the wide support area will help them to keep the plates closed. Repeat the process with the rest of the hair, working strand by strand. NOTE: Never leave in one place longer than 2 seconds. KEY LOCK FUNCTION Press Ў button and hold it for 2 seconds to put into the key lock mode, then ^ or Ў button will be locked and the LCD will appear a lock symbol (Fig. 7). This function can help you to lock the setting as you want. Then press Ў button and hold it for 2 seconds to release. The ^ or Ў button will be re-active and the lock symbol will be disappeared on the LCD. NOTE: Key lock function will not influence the ON/OFF switch. AUTOMATIC SWITCH OFF This hair straightener has an automatic switch off safety feature. After approx. 60 minutes the appliance automatically switches off completely. To reactivate the appliance, you can: - Switch it off and on again with the ON/OFF switch. - Unplug the appliance and plug it again. IONIZATION This hair straightener contains an ion generator. Ions are naturally occurring electrically charged particles. The ionizing feature reduces static in your hair, which helps to make it sleeker, softer and shinier. The ion generator can be used with any heat setting when the appliance is switched (Fig. 8). MAINTENANCE AND CLEANING Disconnect the mains plug before cleaning and storing. Once you have finished, switch off the appliance, unplug it and let it cool down. Make sure that the plates are completely cold before cleaning the appliance. Wipe the outer casing do...