Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If you use the straightener incorrectly or at a wrong temperature setting, you could overheat your hair or even burn it. Always make sure you select a temperature setting that is suitable for your hair type. Note: Make sure your hair is completely dry before you straighten it. straightening 1 2 Put the plug in the wall socket. Set the on/off slide switch to ‘I’ to switch on the appliance (Fig. 3). The default temperature setting of 120 appears on the display. As , soon as the appliance has heated up to this setting, the word ‘READY’ appears on the display (Fig. 4). EnglisH 9 Never leave the appliance unattended when it is plugged in. Always put the appliance on a heat-resistant surface when it is heating up and when it is hot. For safety reasons, the straightener automatically switches off after having been on for 1 hour. 3 Select a temperature setting that is suitable for your hair type. -Always select a low setting when you use the straightener for the first time. -For coarse, curly or hard-to-straighten hair, select a medium to high setting (170 and up). -For fine, medium-textured or softly waved hair, select a medium to low setting (160 and below). Note:Take extra care with pale, blonde, bleached or colour-treated hair, since it is susceptible to damage at high temperatures. 4 Use the + and - buttons to set the appropriate temperature setting. (Fig. 5) The display shows the selected temperature setting. , When the appliance has heated up to the selected setting, the word , ‘READY’ appears on the display. The bars on the display show the remaining usage time of the , appliance.The total usage time is 60 minutes. Every ten minutes, one of the six bars disappears. After 60 minutes, the appliance switches off automatically. 5 6 Comb or brush your hair so that it is disentangled and smooth. (Fig. 6) Use a comb to divide the hair into sections. Do not put too much hair in one section. Note: It is better to section off the crown area and to straighten the hair underneath first.Then straighten the top area. 7 Take a section that is not wider than 5cm. Place it between the straightening plates and press the handles of the appliance firmly together. 10 EnglisH 8 Slide the straightener down the length of the hair in 5 seconds, from root to hair end, without stopping to prevent overheating (Fig. 7). Tip: If you want to create flicks, straighten the lock and turn the straightener a half-circle inwards (or outwards) when you get to the end of the lock. Hold the straightener in this position for 2 to 3 seconds and then release the lock. 9 Repeat this process after 20 seconds until you have achieved the desired look. 10 Let your hair cool down. Do not comb or brush it before it has cooled down, as this would ruin the hairstyle you have just created. curling With the straightener you can make curls in the same way as with a regular brush.The curls are created by the rounded edges of the straightening plates. The thermo-protected cur ved surface of the plates cools down the curls for long-lasting results. To prevent damage to your hair or hair ends: -Do not clamp the hair ends between the straightening plates and wind the hair around the plates as you would with a curler. -Do not wind the hair around only one of the straightening plates. Simply place the lock between the plates, close the straightener and keep it closed while you pull it downwards. 1 2 3 4 Follow steps 1 to 8 in section ‘Straightening’. Take a lock not wider than 5cm and clamp the lock between the straightening plates fairly close to the scalp.Then pull the lock away from your scalp to prevent burning the skin. (Fig. 8) Turn the straightener 180 degrees inwards until the lock forms a U-shape (Fig. 9). Pull the straightener downwards in one smooth movement.When you come closer to the end of the lock, slowly turn the straightener inwards (Fig. 10). EnglisH 11 Note: The slower the movement, the tighter the curl; the faster the movement, the looser the curl. If you do not achieve the desired look the first time, repeat this process after 20 seconds.These 20 seconds are necessary to let your hair cool down. Note:The appliance may produce some smoke when you use it for curling. This is normal. cleaning Never immerse the appliance in water or any other liquid, nor rinse it under the tap. Switch off the appliance and unplug it. Let the appliance cool down completely on a heat-resistant surface. Clean the appliance with a damp cloth. 1 2 3 Note: Make sure the appliance is completely dry before you use or store it. storage Switch off the appliance and unplug it. Let the appliance cool down on a heat-resistant surface. Put the appliance in the heat-resistant pouch supplied and store it in a safe and dry place.You can also store the appliance by hanging it from its hanging loop. Never wind the mains cord round the appliance. 1 2 3 Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collec...