Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
• Children should be super vised to ensure that they do not play with the appliance. • For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. Electromagnetic fields (EMF) This appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in an official collection point for recycling. By doing this, you help to preser ve the environment. Straighten your hair Ensure that you select a temperature setting that is suitable for your hair. Always select a low setting when you use the straightener for the first time. Hair Type Temperature Setting Coarse, curly, hard-to-straighten Mid to High (170°C - 199°C) Fine, medium-textured or softly waved Low to Mid (160°C and below) Pale, blonde, bleached or color-treated Low (Below 160°C) 1 Connect the plug to a power supply socket. 2 Press and hold the button ( ) until the LCD screen lights up. » The default temperature setting is displayed on the LCD screen ( ). 3 Press the temperature buttons ( ) to select a suitable temperature setting for your hair. » When the straightening plates have heated up to the selected temperature, the indication ‘READY’ ( ) is displayed. » Note: If no button is pressed over 4 seconds, the key-lock function will activate automatically, with all the buttons on the appliance deactivated. When the key-lock function is activated, the key-lock indication ( ) is displayed on the LCD screen.To deactivate the key-lock function, slide and hold the key-lock button ( ) for 1.5 seconds. » Tip: To avoid unintentional switching of buttons during process, you can also activate the key-lock function manually by sliding and holding the key-lock button ( ). » Note: The appliance is equipped with an auto-shut off function. After 60 minutes, the appliance switches off automatically.You can re-star t the appliance by pressing and holding the button until the LCD screen lights up. 4 Slide the straightening plates lock ( ) to to unlock the plate arms. 5 Comb your hair and take a section that is not wider than 5cm for straightening. 6 Place it between the straightening plates ( ) and press the plate arms together. • Sonic function is on by default with the SONIC indication displayed ( ) on the LED screen. • The sonic vibration only star ts when the straightening plates are pressed together.The straightening plates make a rattling sound when they are slightly in contact, which does not affect the performance of the appliance. • To switch off or on the sonic function, press the SONIC button ( ). 7 Slide the straightener down the length of the hair in a single motion (max. 5 seconds) from root to end, without stopping to prevent overheating. • To create flicks, turn the straightener half-circle inwards (or outwards) when it reaches the hair ends. Hold the straightener in that position for 2 to 3 seconds, and then release it. 8 After 20 seconds, repeat step 6 and 7 until you achieve the desired look. 9 To straighten the rest of your hair, repeat steps 6 to 8. After use: 1 Deactivate the key-lock function by sliding and holding the key-lock button ( ) for 1.5 seconds. 2 Switch off the appliance and unplug it. 3 Place it on a heat-resistant surface until it cools down. 4 Clean the appliance and straightening plates with damp cloth. 5 Lock the straightening plates by closing the plate arms and sliding the plates lock to . 6 Keep it in a safe and dr y place, free of dust.You can also hang it with the hanging loop ( ). 4 Guarantee and service If you need information e.g. about replacement of an attachment or if you have a problem, please visit the Philips website at suppor t or contact the Philips Customer Care Centre in your countr y. The phone number is in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your countr y, go to your local Philips dealer. 5 Troubleshooting Problem Cause Solution The The power socket to Ensure the socket is live. appliance which the appliance does not has been connected work at all. may not live. Key-lock function is Deactivate the key-lock function activated by sliding and holding the key-lock button for 1.5 seconds. The mains cord of If the mains cord is damaged, you the appliance may be must have it replaced by Philips, damaged. a ser vice centre authorised by Philips or similarly qualified persons in order to avoid a hazard. ©2012 Koninklijke Philips Electronics N.V. All rights reser ved. Specifications are subject to change without notice. Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. 3140 03...