Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Do not leave the styler in your hair longer than 10 seconds. large or tight curls 1 Connect the large or small curling attachment to the handle. Take a lock of hair, press the lever to open the clip and place the lock between the barrel and the clip (Fig. 6). Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel. Note: Make sure that you wind the end of the lock in the required direction. 5 Open the clip after 5 to 10 seconds and remove the barrel from the hair. Let the curls cool down before you comb, brush or finger-comb the hair into its final style. Tip:You can comb the curls with your fingers to add volume. 10 EnglisH Waves Connect the small curling attachment to the handle. Slide the slide- on brush onto the curling attachment. Take a lock of hair and wind it round the slide-on brush (Fig. 7). Prevent the slide-on brush from getting tangled in the hair in the following way: -Do not put too much hair in one lock. -Do not wind a lock of hair more than twice round the slide-on brush. -When you unwind a lock of hair, make sure that you hold the slide-on brush away from the underlying hair. Remove the slide-on brush from your hair after 5 to 10 seconds. Let the waves cool down before you comb, brush or finger-combthe hair into its final style. ringlets 1 Connect the large curling attachment to the handle. Slide the slide- on spiral onto the curling attachment. Take a lock of hair, press the lever to open the clip and place the lock between the barrel and the clip (Fig. 8). Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel following the spiral profile. Note: Make sure that you wind the end of the lock in the required direction. 5 Open the clip after 5 to 10 seconds and remove the barrel from the hair. Let the ringlets cool down before you comb, brush or finger-combthe hair into its final style. Flicks 1 Connect the straightening attachment to the handle. Slide the straightening plates into the attachment with the curved sides pointing towards each other (Fig. 9). EnglisH 11 Take a lock of hair (max. 5 to 6cm wide). Press the lever to open the straightening attachment and place the lock between the plates (Fig. 10). Decide if you want to create inward or outward flicks. Hold the appliance in such a way that the cur ved sides of the plates create the desired type of flick. Slide the styler gently down the length of the hair in a few seconds. When the plates are -5cm above the end of the lock, slightly twist the appliance inwards or outwards to create the desired type of flick. sleek look 1 Press the lever to open the straightening attachment. Remove the straightening plates one by one. Grab the cool tip and pull each plate out of the straightening attachment (Fig. 11). Turn the plates round and slide them back into the attachment with the flat sides pointing towards each other (Fig. 12). You can now use the straightening attachment to create sleek hair without flicks. Make sure that the edges of the plates are inserted properly into the grooves. Take a lock of hair (max. 5 to 6cm wide). Press the lever to open the straightening attachment and place the lock between the plates. 5 6 Slide the styler gently down the length of the hair in a few seconds. Let the sleek hair cool down before you comb or brush it. cleaning Never immerse the appliance in water or any other liquid, nor rinse it under the tap. Unplug the appliance. 1 EnglisH Place the styler on the support of the attachment in a safe place and let it cool down. Clean the appliance and the attachments with a small brush or a dry cloth. storage 1 Unplug the appliance. Place the styler on the support of the attachment in a safe place and let it cool down. Store the appl...
Эта инструкция также подходит к моделям:Стайлеры - HP4696/01 (892.42 kb)
Стайлеры - HP4696/09 (892.42 kb)
Стайлеры - HP4696/00 (892.42 kb)