Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Philips, модель HP4698/00

Производитель: Philips
Размер: 4.85 mb
Название файла:

Язык инструкции:svitentresfrdenlptdafi

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


Unplug the appliance when you remove an attachment after or during styling. Do not touch the metal and ceramic parts of the attachment, as they are hot. EnglisH using the appliance With the Salon Multistylist 10-in-1 you can create tight curls, large curls, waves, large or small ringlets, oval curls, flicks and a sleek look. 1 Comb or brush your hair so that it is disentangled and smooth. Connect an attachment to the handle (see chapter ‘Preparing for use’). Make sure that the support points downwards. Place the appliance on the support of the attachment. Put the mains plug in the wall socket. The power-on light goes on and the appliance heats up (Fig. ). , The appliance is ready for use when the ready dot on the , attachment changes colour (Fig. 5). 5 Style your hair. See the sections below for specific instructions for each attachment. Note:When you use one of the curling attachments or the slide-on brush, always make sure that you wind the end of the lock in the required direction. 6 Leave the styler in your hair for a few seconds. How long you have to keep the styler in your hair depends on the thickness of your hair. Do not leave the styler in your hair longer than 10 seconds. large or tight curls 1 Connect the large or small curling attachment to the handle. Take a lock of hair, press the lever to open the clip and place the lock between the barrel and the clip (Fig. 6). Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel. Note: Make sure that you wind the end of the lock in the required direction. Open the clip after 5 to 10 seconds and remove the barrel from the hair. 10 EnglisH 5 Let the curls cool down before you comb, brush or finger-comb the hair into its final style. Tip:You can comb the curls with your fingers to add volume. Waves Connect the small curling attachment to the handle. Slide the slide- on brush onto the curling attachment. Take a lock of hair and wind it round the slide-on brush (Fig. 7). Prevent the slide-on brush from getting tangled in the hair in the following way: -Do not put too much hair in one lock. -Do not wind a lock of hair more than twice round the slide-on brush. -When you unwind a lock of hair, make sure that you hold the slide-on brush away from the underlying hair. Remove the slide-on brush from your hair after 5 to 10 seconds. Let the waves cool down before you comb, brush or finger-combthe hair into its final style. large ringlets 1 Connect the large curling attachment to the handle. Slide the slide- on spiral onto the curling attachment. Take a lock of hair, press the lever to open the clip and place the lock between the barrel and the clip (Fig. 8). Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel following the spiral profile. Note: Make sure that you wind the end of the lock in the required direction. 5 Open the clip after 5 to 10 seconds and remove the barrel from the hair. Let the ringlets cool down before you comb, brush or finger-combthe hair into its final style. EnglisH 11 small ringlets Connect the twisted curling attachment to the handle. Take a lock of hair, press the lever to open the clip and place the lock between the barrel and the clip (Fig. 6). Note: Make sure that you wind the end of the lock in the required direction. Open the clip after 5 to 10 seconds and remove the barrel from the hair. Let the ringlets cool down before you comb, brush or finger-combthe hair into its final style. oval curls 1 Connect the oval attachment to the handle. (Fig. 6) Take a lock of hair, press the lever to open the clip and place the lock between the barrel and the clip. Note: Make sure that you wind the end of the lock in the required direction. Open the clip after 5 to 10 seconds and remove the barrel from the hair. Let the oval curls cool down before you comb, brush or finger- comb the hair into its final style. Flicks 1 Connect the straightening attachment to the handle. Slide the straightening plates into the attachment with the curved sides pointing towards each other (Fig. 9). Take a lock of hair (max. 5 to 6cm wide). Press the lever to open the straightening attachment and place the lock between the plates (Fig. 10). Decide if you want to create inward or outward flicks. Hold the appliance in such a way that the cur ved sides of the plates create the desired type of flick. 1 EnglisH Slide the styler gently down the length of the hair in a few seconds. When the plates are -5cm above the end of the lock, slightly twist the appliance inwards or outwards to create the desired type of flick. sleek look 1 Press the lever to open the straightening attachment. Remove the straightening plates one by one. Grab the cool tip and pull each plate out of the straightening attachment (Fig. 11). Turn the plates round and slide them back into the attachment with the flat sides pointing towards each other (Fig. 12). You can now use the straightening attachment to create sleek hair ...

Эта инструкция также подходит к моделям:
Стайлеры - HP4698/01 (4.85 mb)
Стайлеры - HP4698/10 (4.85 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории