And The sub-group of Satellite and Scramble channel list may exist or not depending on the result of Channel Search. • If Within the current channel list option is selected from MENU - Edit channels - Channel Change Mode menu, you can only change programme within the selected channel list using the CH-/CH+ while your watching a programme. 5.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the button, and pres

E2 ~ E3 Copyright & Glossary............................................... E4 STB Connections..................................................... E5 ~ E7 Reference ................................................................ E8 Guide of Functions .................................................. E9 ~ E10 Guide of Main Menu ................................................ E11 ~ E30 Motorised System.................................................... E31 ~ E34 Troubleshooting Guide ........

To do this, you must access the Satellite Settings menu. Do as follows ; 1. Select Service Searching from the Main Menu and press the OK button, to display the Service Searching menu. 2. Select the Manual Search option and press the OK button, to display the Manual Search menu. 3. Select the Antenna Alternative option and press the OK button, to display the Satellite Settings menu. 4. In the Satellite Settings menu ensure that you have DiSEqC Command Mode option set to User. 5. Highlight the opt

The following options are available on the Satellite Setting menu. Satellite Name A selection of satellite names that can be used to identify a motor position. If the satellite name you require is not available, please use other. In installer mode the Satellite Name Reference refers to the 0 position of the motor. Movement In user mode this is used to fine-tune the position of the motor for better reception. In Installer mode this is used to search for the position of a satellite manually. Motor

4. Press the EXIT button to cancel the deletion. . Move 1. Press the GREEN( )button to move the service to where you want to locate. Then, the icon( ) will be displayed in front of the service number. 2. Use the buttons to select a new location. 3. Press the OK button to fix the location. 4. Press the EXIT button to return to the original location. . Lock 1. Press the YELLOW( Then, the symbol . service name. . Skip 1. Press the BLUE( Then, the symbol . service name. buttons. )button to lock serv

2. Connect DiSEqC 1.2 Please refer to page GB39. The Locking Time might take longer than expected during the initial boot if the motorised system is set .enable. mode. 3. Connect a Satellite antenna To the digital receiver, you can connect either a single satellite antenna directly or through converter box several antennas or LNB of multi-feed equipment. You can connect a further Sat-receiver(for example analogue), with the receiver of common antenna equipment that has satellite signals. 4. Loop

2. You can easily put optional value with using NUMERIC buttons(0~9). GB32 Guide of Main Menu column use the symbol rate to input. Then press the EXIT and the RED( )button to exit from input mode. 3. Press the RED( )button for confirmation, and you will successfully exit from input mode. If press the OK button at symbol rate value input mode, the value will be confirmed, and if you moves left or right buttons, you can differ values of To delete a Symbol Rate in the above list, press the 0(Numeri

3. Connect the coaxial cable from the LNB of your motorised system(DiSEqC 1.2 Motor) to the LNB IN socket on the STB. GB10 Remote Control Unit GB11 1 2 3 4 5 6 7 8 9 NUMERIC BUTTONS Press to select a service, enter your PIN code or Numerics on the menu. INFORMATION(RED) Press to display the programme information box on the screen. This button functions same as the RED button on the menus. SOUNDTRACK(GREEN) Press to display the soundtrack list for the current service. And this button functions

GB14 • Lock To lock the current service : 1. Move the cursor and select Lock on Category window and press the button to move to the Item window. 2. Select a desired Lock using the buttons, and then press the OK button. 3. “Lock ON” will be displayed on Category window. 4. When you completed your selection, move to Operation window using the button and then move the cursor to save and press the OK button. To unlock the current service: 1. Select Unlock on the Item window by pressing the buttons a