Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool etc. • Do not expose the components of your systems to extremely high temperatures or bright light sources. • Do not open the product: the device contains live parts. The product should only be repaired or serviced by a qualified repairman • In case of improper usage or if you have opened, altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility. • Adapters: Only connect the adapter to the mains after checking whether the mains voltage is the same as the values on the identification tags. Never connect an adapter or power cord when it is damaged. In that case, contact your supplier. APPLICATIONS: The Marmitek GIGAVIDEO 45 is designed to transmit audio and video signals, without running wires. There is a second radio transmission system providing a infra-red return path enabling you to control your VCR or Satellite Receiver from a remote location. • Watch a movie on any TV in your home without moving your VCR or running cables • Watch satellite programs on any TV anywhere in your house • Watch DVD movies from your PC on your TV in a remote location • Listen to MP3 audio from your PC on your Hifi system in the livingroom • Monitor your sleeping baby, eldery or disabled on your TV by using your videocamera or CCD camera • Make perfect demonstrations without wiring TV’s during trade-shows, seminars, etc. 1 SETTING UP THE GIGAVIDEO TRANSMITTER 1. Connect one set of Audio/Video cables to the VIDEO [C] and AUDIO [D] jacks of your Marmitek GigaVideo Transmitter. Take care to match the colors of the plugs on the cable with the jacks on the GigaVideo Transmitter. 2.Connect the other end of the cable to the Audio/Video OUT jacks of the video source you want to transmit the signal from (e.g. your VCR, DVD, Satellite or TV: connecting the transmitter to your VCR or Satellite receiver, allows you to choose channels independent from your main TV). If your video source is equipped with a SCART connector use the SCART Adapter labelled TRANSMITTER (the one with the extra wires attached on the side). If there already is a SCART cable attached to the SCART connector of your source, un-plug it first. GIGAVIDEO 45 Now plug in the SCART Adapter labelled TRANSMITTER. To re-establish your existing connection plug in your original SCART cable into the back of the SCART Adapter. Connect the Audio/Video cable from the transmitter to the yellow, red and white connectors of the SCART Adapter. See the picture for more details. If the jacks are colored differently, connect the yellow plug on the jack VIDEO, the red plug on the jack AUDIO RIGHT and the white plug to the jack AUDIO LEFT. GIGAVIDEO TRANSMITTER ORIGINAL SCART CABLE TO TV TO SCART VIDEO SCART ADAPTER “TRANSMITTER” 3. Switch the Power slide switch [B] on the side into the "OFF" position 4. Plug the supplied mains adaptor into a wall outlet and connect the plug at the rear side of the transmitter [E]. Only use the supplied mains adaptor! 5. Switch the Power switch [B] to the ON position. 6. Set the Channel-switch [A] on A. 7. Position the transmitter in a convenient location and orient the antenna [K] If you have several A/V components: If you have two or more A/V components (e.g. VCR, Cable box, Laserdisc or satellite receiver) that you want to watch in another room, they will probably already been hooked up to the local TV in series. To connect the GigaVideo Transmitter you just need to indentify the last component in the chain and connect the Line OUT or scart to the GigaVideo Transmitter IN jacks. 2 SETTING UP THE GIGAVIDEO RECEIVER 1. Connect a set of Audio/Video cables to the LINE OUT jacks [H+I] of your GigaVideo Receiver. Connect the other end to your TV. If your TV has a Scart connector, you may use the Scart adaptor provided; labelled: "Receiver". 2. Switch the Power slide switch [B] on the side into the "OFF" position 3. Plug the supplied mains adaptor into a wall outlet and connect the plug to the backside of the receiver [E]. Only use the supplied mains adaptor! 4. Switch the Power switch [B] to the ON position. 5. Set the Channel-switch [A] on A. 6. Put the side antenna [J] of the remote control extender in an upright position. MARMITEK 3 FINE TUNING YOUR GIGAVIDEO SET Make sure your A/V equipment is switched on. Switch the receiving TV on and select the A/V channel (normally found on the "0" or "AV" button). The picture should now automatically be there, no tuning is required. The wireless GigaVideo usually works best with the indented faces of the antennas [K] on the Transmitter and Receiver unit look at one another. Sometimes however distance, reflections and other effects in the home may a...