Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Introduction 1.1 Overview 1.2 Main Features 2 2. Safety/Precautions 2.1 Safety 2.2 Precautions 3 3. Points to Check before Use 3.1 Accessories 5 4. Controls/Functions 4.1 Front Panel 4.2 Rear Panel 4.3 Remote controller 6 5. How to Connect 10 6. Operation 6.1 Getting Started 6.2 System Setting 6.3 Channels 6.4 Electronic Program Guide 6.5 Games 6.6 System Information 6.7 Common Interface 11 7. Troubleshooting 37 8. Specifications 38 1 Introduction Safety/Precautions Introduction Safety/Precautions 1.1 Overview 2.1 Safety This satellite receiver is designed for the reception Depending on your location, enjoy the rich choice broadcasting a large range of programs: culture, receiver is assembled with highly qualified electronic 1.2 Main Features MPEG-II Digital & fully DVB compliant. Supports 1 CAM of DVB Common Interface standard (Conax, Cryptoworks, SECA, Viaccess, BetaCrypt and etc) On-screen display with 256 color resolution. DiSEqC control Version 1.0, 1.1, 1.2 and USALS compatible. Renameable 8 favorite channel groups. Fast channel change less than 1 second. Advanced Blind search function. Powerful channel control by Favorites, Lock, Skip, Move and Delete. Channel sorting by Alphabet, Transponder and Scrambled. Multilingual language OSD & menu: English, Italian, Turkish, Arabic, Parsi, German, French, Russian, Spanish, Portuguese, Dutch. Extended EPG and program reservation through EPG. Teletext by OSD/ VBI Supports multilingual subtitle Supports multilingual audio language Last channel memory function. Total 5,000 channels programmable. Advanced channel list menu Multi satellite search Games with stereo sounds Software & channel database upgrade via RS-232C: PC to STB/ STB to STB Parental lock/ Installation Lock / Receiver Lock / Channel Lock / Lock Channel Confirm. Digital audio output [S/PDIF] Multi picture display Zoom function. Color adjustment function DiSEqC is a trademark of EUTELSAT 2 Be sure to read this user's manual before Do not touch the power cord with wet starting the operation of the unit. hands as it may cause electric shock. Never open the cover. It is very Place the unit in a well ventilated and dangerous to touch the inside of the no-heat environment. unit due to possible electric shock. When you do not use this unit for a A professional installation is required. long time, make sure that power cord If reception is interrupted, contact your is pulled out from the outlet. Also do local service centre. not use a damaged power cord as it may cause fire or electric shock. 3 4 5 When installing the unit 2.2 Precautions Install the unit horizontally. An uneven installation may cause the unit to be damaged. Do not put heavy items such as a TV set on the unit. That may damage the unit. Do not leave the unit where the water drops or splashes. Do not put water holding items such as vases on the unit. Do not install the unit: Where it is subject to vibrations Where it is exposed to direct sunlight Where there is humidity Where the temperature is too high or too low. Where there is no ventilation Moving the unit to a hot area from a cold one will cause condensation. Do not operate the unit for one or two hours or until it has dried completely. User's manual : 1 User's manual Remote control : 1 Batteries (AAA type) : 2 If any of the above-listed accessories is missing, contact your sales representative. The accessories below are included with this receiver: Points to Check before Use 3.1 Accessories Your dish should be properly installed and azimuth and elevation must be precisely set up. This unit supports DiSEqC 1.2 and can work with a compatible antenna positioner. Ask your dealer for information. 3.2 The Satellite dish Controls/4.2 Rear Panel Controls/4.2 Rear Panel 4.1 Front Panel 2 1 3 4 5 4 3 2 1 Power : Switches the receiver between ‘Standby’ and ‘Power ON’ modes. Standby/Power on Indications Lamp : Flashes red light in ‘Standby’ mode and shows no light in ‘Power ON’ mode. Indication Light : Flashes when a key on the Remote Control Unit (RCU) is pressed. - 5 CH. / : To switch channels or change the cursor position on the application screen. 101 3 5 7 9 112 4 6 8 No. Name Connector Function 1 RF OUT UHF 21-69 IEC 169-2 male Output to TV 2 TV ANT IN IEC 169-2 female Input from terrestrial antenna 3 AUDIO L RCA cinch Left audio output 4 AUDIO R RCA cinch Right audio output 5 VIDEO RCA cinch Composite video output 6 S/PDIF RCA cinch Digital audio output 7 VCR/AUX SCART SCART CVBS Video Output CVBS, RGB Video Input Audio Output 8 TV SCART SCART CVBS, RGB Video Output Audio Output 9 RS-232C DB-9 Low speed serial port 10 LNB INPUT IEC 169-24 female IF input from LNB to digital tuner 11 LOOP OUT IEC 169-24 female IF loop-through output from digital tuner 67 4.3 Remote 4.3 Remote 4.3 Remote 1 2 4 5 10 11 3 6 7 12 13 3 2 1 POWER : To turn the receiver On/Off. MUTE : To turn the sound On/Off. Numeric Keys (0-9) : To enter numerical settings (such as channel numbers) directly. 4 INFO : To show inform...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - HTS 2100S+ (2.25 mb)