Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
3V.Format ..changes video resolution. See § 3.2.4 for more details. 4 . Numeric buttons are used to enter a service number for service change or to specify values for menu options. 5 switches between the current service and the previously viewed one. 6 displays teletext. 7 is used to select an audio track and a sound mode, or a video track of multifeed programme. 8MENU ..displays the main menu. It is also used to return to the previous menu from a submenu. 9OK ..displays the services list. See § 5.2.1 for more details. It is also used to select a menu item. 10 V+ buttons decrease or increase the volume. They are also used to change values for menu options. 11 . . EXIT . ..is used to exit the current screen. 12 . These buttons have different functions per menu. They will be guided by on-screen help. 1.3 What is common interface? 5 13SAT ..displays the satellite list. 14 mutes the sound. Press again to switch it back on. 15A/R ..changes aspect ratio. See § 3.2.3 for more details. 16 switches between television services and radio services. 17FAV ..displays the favourite lists. 18 is used to select a subtitle track. 19 is used to set a sleep timer. 20. ... .. P. , P+ buttons switch to previous or next service. They are also used to navigate in menus and interactive screens. 21GUIDE ..displays the electronic programme guide. 22 displays the service information box. It is also used to display more information about a programme. 23AUX ..switches the output of the TV SCART socket be tween the digital receiver and the device connected to the VCR SCART socket. See § 3.2.2 for more details. 1.3 What is common interface? Some broadcasts are scrambled so that only paid subscribers can enjoy them. Scrambled services can only be viewed with a Conditional Access Module (CAM) and a subscription card belonging with the scrambling system. Common Interface (CI) is the slot on a digitial receiver into which a conditional access module may be insterted. The front of the digital receiver has two common interfaces. To watch a pay service, you should take the following steps: 6 Introduction 1. Purchase a conditional access module and a subscription card for the pay service you want to watch. 2. Insert the subscription card into the conditional access module. 3. Insert the conditional access module into a common interface on the front of the digital receiver. To view the information about the module and subscription card inserted into the digital receiver, select the Common Interface menu. You should see a screen like the left figure. Chapter 2 Setup 2.1 Unpacking Before going any further, check that you have received the following items with your digital receiver. • Remote control unit • Two batteries for the remote control (AAA 1.5 V) • A copy of this user guide NOTE Accessories may vary according to your local area. 2.2 Safety precautions Please read carefully the following safety precautions. • The mains power must be 90 to 250 volts. Check it before connecting the digital receiver to the wall outlet. For the power consumption of the digital receiver, refer to Table 2.1. 8 Setup • The wall outlet should be near the equipment. Do not run an extension lead to the unit. • Do not expose the digital receiver to any moisture. The digital receiver is designed for use indoors only. Use dry cloth when cleaning the digital receiver. • Place the digital receiver on a firm and level surface. • Do not place the digital receiver close to heat emitting units or in direct sunlight, as this will impair cooling. Do not lay any objects such as magazines on the digital receiver. When placed in a cabinet, make sure there is a minimum space of 10 centimetres around it. For the physical specification of the digital receiver, refer to Table 2.2. • Protect the power cord from being walked on or pinched. If the wires are exposed or the cord is damaged, do not use the digital receiver and get the cord replaced. • Never open the digital receiver casing under any circumstances. The warranty will be void. • Refer all servicing to a qualified service technician. Table 2.1: Power specifications Input voltage 90 to 250 V AC, 50/60 Hz Power consumption 37 W at maximum in operation 4 W in standby Table 2.2: Physical specifications Size 340. 60. 265 mm Weight 2.37 kg Operating temperature 0 to 45 °C Storage relative humidity 5 to 90 % 2.3 Rear panel connections 9 2.3 Rear panel connections The TF 7710 HSCI/TF 7720 HSCI has some connections on the back panel. HDMIYUSBPbPrAUDIOVIDEOLRTVVCRRS-232S/PDIFYPbPrSCART123456789101112LNB INLNB OUT Check what connections your television set has in comparison with the digital receiver. 1. LNB IN Satellite broadcasting signal input socket. 2. LNB OUT Satellite broadcasting signal output socket through the LNB IN socket for another digital receiver. 3 . YPbPr - SCART Video output selection switch. See § 3.2.4 for more details. 4Audio and video output socket for the high . HDMI definition television set. 5USB port for firmware up...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - TF 7720 HSCI (1.17 mb)