Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Note If the screen appears fuzzy, the program you are watching may be protected by Macrovision. Turn the VCR off to improve the picture quality. 14 Chapter 3: Connecting Your System 1 2 3 5 2 2 4 SAT-A2 receiver is pictured, but connections are identical for SAT-B2. Chapter 3: Connecting Your System 15 Hi-Fi TV, Hi-Fi VCR, Audio Receiver (SAT-A2 Only) Refer to the illustration on the opposite page. 1 Connect the RG-6 cable from the satellite antenna’s LNB to the DSS receiver’s SATELLITE IN jack. 2 Connect the DSS receiver’s audio OUT jacks to the audio receiver’s audio IN jacks. 3 Connect the DSS receiver’s AV jacks to the A/V IN jacks on the TV. 4 Complete one of the following to connect the DSS receiver to the VCR: Better Connection: Connect the DSS receiver’s A/V jacks to the A/V IN jacks on the VCR. Some VCRs and TVs label this jack RF Good Connection: Connect the DSS receiver’s VHF(SAT)/UHF IN, instead of VHF/UHF IN. OUT jack to the VCR’s VHF/UHF IN jack. 5 Complete one of the following to connect the VCR to the TV: Better Connection: If both your TV and VCR have A/V jacks, connect the VCR’s A/V OUT jacks to the TV’s A/V IN jacks. Good Connection: If your TV or VCR has only an RF jack, connect the VCR’s VHF/UHF OUT jack to the TV’s VHF/UHF IN jack. 6 Connect one end of the telephone line cord to the DSS receiver’s TEL LINE jack. Connect the other end to your home’s modular telephone outlet. 7 Connect one end of the AC power cord to the DSS receiver’s AC IN jack. Connect the plug end to an AC outlet. Optional Connections If you have a cable input, cable box, or a terrestrial TV antenna, connect it the VCR’s VHF/UHF IN jack. Best Connection: If your TV has an S-VIDEO jack, use an S-VIDEO cable to connect the DSS receiver’s S-VIDEO jack to the TV’s S-VIDEO IN jack. This provides the best picture quality. Then use audio cables to connect one set of the DSS receiver’s audio jacks to the audio receiver’s AUDIO IN jacks. If you are using the VCR Mouse, see page 20 for setup instructions. Note If the screen appears fuzzy, the program you are watching may be protected by Macrovision. Turn the VCR off to improve the picture quality. 16 Chapter 3: Connecting Your System 1 5 7 4 4 6 2 3 Chapter 3: Connecting Your System 17 Home Entertainment System (Hi-Fi TV, Hi-Fi VCR, Audio/Video Receiver) Refer to the illustration on the opposite page (SAT-A2 receiver is pictured). 1 Connect the RG-6 cable from the satellite antenna’s LNB to the DSS receiver’s SATELLITE IN jack. 2 Connect the DSS receiver’s A/V jacks to the VCR and A/V receiver’s A/V IN jacks. 3 Connect the VCR’s A/V OUT jacks to one set of the A/V receiver’s A/V IN jacks. 4 Connect the A/V receiver’s MONITOR OUT jack to the TV’s VIDEO IN jack. 5 Connect one end of the telephone line cord to the DSS receiver’s TEL LINE jack. Connect the other end to your home’s modular telephone outlet. 6 Connect one end of the AC power cord to the DSS receiver’s AC IN jack. Connect the plug end to an AC outlet. Optional Connections Some VCRs label this jack RF IN, If you have a cable input, cable box, or a terrestrial TV antenna, instead of VHF/UHF IN. connect it to the VCR’s VHF/UHF IN jack. Best Connection: If your A/V receiver has an S-VIDEO jack, use an S-VIDEO cable to connect the DSS receiver’s S-VIDEO jack to the A/V receiver’s S-VIDEO IN jack. Then connect an S-VIDEO cable from the A/V receiver to the TV’s S-VIDEO IN jack. This provides the best picture quality. Then use audio cables to connect one set of the DSS receiver’s audio jacks to the A/V receiver’s AUDIO IN jacks. If you are using the VCR Mouse, see page 20 for setup instructions. Note If the screen appears fuzzy, the program you are watching may be protected by Macrovision. Turn the VCR off to improve the picture quality. In this configuration, the A/V receiver must be turned on in order to pass the video signals through to your TV. 18 Chapter 3: Connecting Your System 1 2 6 3 5 2 4 SAT-A2 receiver is pictured, but connections are identical for SAT-B2. Chapter 3: Connecting Your System 19 Connecting the VCR Mouse SAT-A2 receiver is pictured, but connections are identical for SAT-B2. The VCR Mouse works with the DSS receiver’s Timer function to automatically start and stop the recording function of your VCR. 1 Connect the VCR Mouse to the DSS receiver’s VCR MOUSE/ CONTROL S OUT jack. Then place the VCR Mouse on top of and slightly overhanging the front of the VCR. For best results, place the VCR Mouse directly above the VCR’s IR receiving area. 2 Find the three-digit code number for your VCR in the table below. If more than one code number is listed, use the number listed first to complete step 3. Manufacturer Code Manufacturer Code Manufacturer Code Sony* 301, 302, 303 Hitachi 304, 305 Samsung 313, 321, 322 Bell & Howell 343 JVC 314 Scott 312 Daewoo 341 Magnavox 308, 309, 310 Sharp 327, 328 Emerson 316, 317, 318, 319, 320 Mitsubishi 323, 324, 325, 326 Shintom 315 Fisher 330, 333, 334, 335 NEC 336, 337 Symphon...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - SAT-B2 (387.88 kb)